品牌
其他厂商性质
所在地
回转滾筒干燥机组Rotary Drum Drying Unit回转滚筒干燥机
面议V型强制搅拌混料机V-shaped Forced Stirring Mixer
面议V型混料机 V-shaped Mixer
面议立式桨叶强制搅拌混料机Vertical Blade Forced Stirring Mixer
面议双螺旋锥形强制搅拌混料机Duplex Cone Forced Stirring Mixer
面议双锥回转混料机Double Cone Rotary Mixer
面议粉碎机Universal Pulverizer
面议锤片式剪切粉碎机Hammer-Shape Shearing Pulverizer
面议超微机械式粉碎机Superfine Mechanical Pulverizer
面议二维混合机2D Motion Mixer
面议槽型强制搅拌混料机Groove-type Forced Stirring Mixer槽型混合机
面议三维空间运动混料机3D Spatial Motion Mixer三维混合机
面议旋转制粒机
一、工作原理及应用范围介绍Introduction of Working Principle and Scope of Application
本机通过两台电机及对应传动系统带动碾料器和压料叶做同轴相向旋转运动,利用压料叶特殊的结构把物料向下压,特殊的抛物弧线结构的挤料器把物料向制粒筒进行外挤,从而形成均匀颗粒。
本机适用于制药、食品、化工、农药、化肥、轻工等行业,将潮湿的粉末制成不同粒度的圆柱状颗粒以适应不同工艺需求。
The grinding device and squeezing blade are rotated on the same axle at the opposite directions under the driving of two motors and corresponding drive system, in which the special structure of squeezing blade will squeeze the materials, and the special parabolic curve structure of extruderwill extrude the materials to the granulating cylinder, thus to form the even granule.
The equipment is applicable to pharmacy, food, chemical, pesticide, fertilizer and light industry. The wet powders are manufactured into cylindrical granules with different particle size, so as to meet different process requirements.
二、特点 Characteristics
1. 本机操作简单,维修方便,清洗容易;与物料接触部位均采用不锈钢材料制成,确保物料不变质、不变色。
2. 压料器与挤料器均可实现无极变速,而且还可根据需要选择筛筒孔径,造出不同的粒径的产品以满足用户需求。
3. 特殊的、精准的挤料弧线研制,确保造粒通顺且无死料、无过热料产生。
4. 传动机结构是采用无齿传动系与无油箱结构,防止污染产品,保障清洁生产。
5. 单台产量比一般机型大许多,高效且使用非常方便。
1. The equipment is featured by simple operation, convenient maintenance, and easy to clean; the part contacting with materials is made from stainless steel to ensure no deterioration and discoloration of materials.
2.The squeezer and extruder can realize continuously variable speed, and the pore diameter of screen drum may be selected as required to manufacture products with different grain size, thus to meet customer’s requirements.
3.The special and accurate squeezing arc ensures the smooth pelleting withoutdead mass and overheat material produced.
4.The non-gear drive system and non-fuel tank structure are adopted by the drive motor to prevent product pollution and ensure the clean production.
5.The equipment is large in production capacity, high in efficiency and convenient for application.
三、技术参数(下表中数值仅供选型时参考)Technical parameters (the values in the table below are for reference in type selection only)
四、结构简图Dimension sketch