一、工作原理及应用范围介绍

Introduction of Working Principle and Scope of Application

本机系利用对称或不对称的两只桶型容器组合成“V”字型，物料在V字型容器运行中形成一分一合过程。在此运行过程中实现两股物料充分混合之目的。本机适用于制药、化工、食品等行业可进行两种或两种以上干粉状、颗粒状物料的混和。

The symmetrical or asymmetrical two bucket containers form the “V” shape, and the materials will be separated and combined separately during the operation of V-shaped container, thus to fully mix two materials during this process. This equipment is applicable to pharmacy, chemical and food industries for mixing of two or more dry powder and particle materials.

二、特点  Characteristics

1，该机混和筒结构，混和效率高、。

2，采用不锈钢材料制作，内外壁抛光处理，外形美观。

3，混合均匀，适用面较宽，并能根据用户的要求配套强制搅拌器，以适合较细的粉粒、块状、含有一定水份的物料混合之用。

1.    The mixing drum of this equipment is special in structure and high in mixing efficiency without dead angle.

2.    It is made from stainless steels, and the internal and external wall are polished to form beautiful appearance.

3.    It is uniform in mixing and wide in applicable scope; the forced stirrer may be provided according to customer’s requirements for mixing the fine powder, bulk and water-contained materials.

三、外形简图Dimension sketch

四、技术参数（下表中数值仅供选型时参考）

Technical parameters (the values in the table below are for reference in type selection only)

备注：装载系数均为0.3-0.4，该表中的生产能力均按装载系数0.4，物料密度0.6，混合时间6分钟来计算。

Note: The charging coefficient is in the range of 0.3~0.4. The production capacity in the table shall all be calculated according to the charging coefficient of 0.4, the material density of 0.6 and the mixing time of 6 min.

V型混合机