一、工作原理及应用范围介绍  Introduction of Working Principle and Scope of Application

CH槽型强制搅拌混料机系采用U型容器中心设S形精致强制搅拌器来强化要混合物料之间的混合强度，从而达到高效、适用、均匀混合之目的。CH型混合机广泛用于混合粉状或湿性物料，使不同比例主辅料混合均匀。广泛适用于制药、化工、食品等行业。

For the CH groove-type forced stirring mixer, the U-shaped container is set with S-shaped forced stirrer in the middle to strengthen the mixture strength of materials to be mixed, thus to reach the high efficiency, and applicable and uniform mixing. CH mixer is widely applied in the mixing of powder or wet materials to uniformly mix main and auxiliary materials at different proportions, and applicable for pharmacy, chemical and food industries.

二、特点Characteristics

1. 本机与物料接触处均采用不锈钢制造，浆叶与桶身间隙小，混合*，搅拌轴两端设有密封装置，能防止物料外泄。

2.   搅拌混料轴为通轴设计，保证搅拌与倒料的同轴性与可靠性，同时搅拌桨叶为整厚板材精加工的S形结构，确保混料均匀、耐用。

3.   料斗采用点动控制，出料方便。

1. Parting contacting with the materials are made from stainless steel; there is little gap between the blade and cylinder and no dead angle for mixing; both ends of the stirring shaft are set with sealing devices to prevent the material leakage.

2. The stirring mixing shaft is designed as a through shaft to ensure the coaxality and reliability of stirring and dumping; the stirring blades are in S-shaped structures manufactured by whole thick plates to ensure the mixing uniformity and durable property.

3. The hopper is under the point control, resulting in convenient discharge.

三、技术参数（下表中数值仅供选型时参考）

Technical parameters (the values in the table below are for reference in type selection only)

四、外形简图Dimension sketch

槽型混合机