品牌
代理商厂商性质
苏州市所在地
型号 | 7451 | |||
交流耐压 | ||||
输出范围 | 5KVAC/100mA 500VA | |||
范围 | 解析度 | 误差 | ||
输出电压, ACV | 0-5000 | 1 | ±(2% of setting + 5V) | |
输出频率 | 50Hz/60Hz ±0.1%, 用户设定 | |||
输出波形 | 正弦波, THD.<2%(阻性负载), 波峰因素=1.3-1.5 | |||
输出精度 | ±(1% of setting + 5V), 从没有负载到满载 | |||
设置 | ||||
交流电流上限, mA | 0-99.99 | 0.01 | ±(2% of setting + 2位) | |
交流电流下限, mA | 0-9.999 | 0.001 | ||
上升时间, 秒 | 0.1-999.9 | 0.1 | ±(0.1% of setting + 0.05秒) | |
测试时间, 秒 | 0,0.3-999.9 0=连续 | 0.1 | ||
电弧侦测 | 0,范围1-9,(0=关,9zui高灵敏度) | |||
交流电流归零, µA | 0-2.000 或 自动 | |||
直流耐压 | ||||
输出范围 | 6KVDC/9999µA | |||
输出电压, DCV | 0-6000 | 1 | ±(2% of setting + 5V) | |
输出纹波 | <5% ( 6KV/999µA at Resistive Load ) | |||
设置 | ||||
直流电流上限, µA | 0-9999 | 1 | ±(2% of setting + 3位) | |
直流电流下限, µA | 0-999.9 | 0.1 | ||
上升时间, 秒 | 0.1-999.9 | 0.1 | ±(0.1% of setting + 0.05秒) | |
测试时间, 秒 | 0,0.4-999.9 0=连续 | 0.1 | ||
电弧侦测 | 0,范围1-9,(0=关,9zui高灵敏度) | |||
放电时间 | <200mS | |||
交流电流归零, µA | 0-2.000 或 自动 | |||
上升高电流, µA | 开/关 用户设定 | |||
充电-下限电流, µA | 0-350.0 或 自动设定 | |||
绝缘电阻 | ||||
输出范围 | 1KVDC/9999MΩ | |||
输出电压, DC | 100-1000 | 1 | ±(2% of setting + 3V) | |
电阻上限, MΩ | 0,1-9999(0=关) | 1 | ±(2% of setting+2counts)at 500-1000VDC, 1 -999.9 MΩ ±(8% of setting+2counts) at 500-1000VDC, 1000 -9999 MΩ | |
电阻下限, MΩ | 1-9999 | 1 | ±(8% of setting+2counts) at 100-499VDC, 1 -999.9 MΩ | |
测试时间, 秒 | 0,0.5-999.9秒 0=连续 | 0.1 | ± ( 0.1% + 0.05sec ) | |
充电-下限电流, µA | 0-3.5 或 自动设定 | |||
测量 | ||||
交流/直流电压, KV | 0-6.00 | 0.01 | ± ( 1.5% of reading + 1count ) | |
直流电压, V(绝缘) | 100-1000 | 1 | ± ( 1.5% of reading + 3V ) | |
交流电流, mA | 0-3.500 | 0.001 | ±( 2% of reading + 3counts ) | |
3.00-99.99 | 0.01 | |||
直流电流, µA | 0-350.0 | 0.1 | ± ( 2% of reading + 3counts ) | |
直流电流, µA | 300-3500 | 0.001 | ||
3000-9999 | 0.01 | |||
绝缘电阻, MΩ | 1 – 9999(自动范围) | 0.001 | ± ( 2% of setting+2counts ) at 500-1000VDC, 1 -1000 MΩ | |
0.01 | ± ( 5% of setting+2counts ) at 500-1000VDC, 1000 -9999 MΩ | |||
0.1 | ± ( 8% of setting+2counts ) at 30-500VDC, 1 -1000 MΩ | |||
一般参数 | ||||
交流输入电压 | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 6.3A | |||
PLC外部控制 | Input : Test , Reset , Memory1.2.3 | |||
Output : Pass , Fail , Processing , Reset-Out | ||||
存储 | 50 memories, 8 steps/memory | |||
显示屏 | 20×2 LCD with back light | |||
安全 | Built-in Smart GFI circuit,GFI trip current 450µA max, HV shut down speed: <1mS | |||
按键锁定 | To prevent unauthorized alteration of the test Parameters | |||
较验 | Build-in software and external calibrated meters | |||
后面板输出 | YES | |||
内置多通道扫描 | 选购 | |||
外部多通道扫描 | YES | |||
防高压触电 | YES | |||
指针表头 | YES | |||
RS232接口 | 选购 | |||
GPIB 接口 | YES | |||
打印接口 | 选购 | |||
TUV-GS 认证 | NO | |||
CE 认证 | NO | |||
验证 | Build-in software driven verification menu to test fault detection circuits | |||
报警音量设置 | Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume. | |||
环境 | 0-40℃, 20-80%RH | |||
尺寸/重量 | 430mm (W)×133mm(H)×400mm(D)/ 28Kg | |||
标配附件 | ||||
电源线(15A) | ×1 | |||
保险丝 | ×2 (Including a spare contained in the fuse holder) | |||
高压输出线 1.5m | ×1 (1101) | |||
高压回路线 1.5m | ×1 (1102) | |||
光盘说明书 | ×1 | |||
较验报告 | ×1 |