品牌
代理商厂商性质
苏州市所在地
| 型号 | 7160 | |||
| 交流耐压 | ||||
| 额定输出 | 5KVAC/12mA | |||
| 范围 | 解析度 | 误差 | ||
| 输出电压, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） | |
| 输出频率 | 50Hz/60Hz ±100ppm, User Selection | |||
| 输出波形 | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | |||
| 输出调节 | ± (1% of output + 5V), From no load to full load | |||
| 设置 | ||||
| 交流电流上限, mA | 0.10 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
| 交流电流下限, mA | 0.00 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
| 上升时间, 秒 | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| 测试时间, 秒 | 0, 0.2 - 999.9 | 0.1 | ||
| 电弧侦测 | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| 直流耐压 (7160,7162 ONLY) | ||||
| 额定输出 | 6KVDC/5mA | |||
| 输出电压, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） | |
| 输出纹波 | <5%（6KV/5mA at Resistive Load） | |||
| 设置 | ||||
| 交流电流上限, mA | 0.02 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
| 交流电流下限, mA | 0.00 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
| 上升时间, 秒 | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| 测试时间, 秒 | 0, 0.2 - 999.9 (0=continuous) | 0.1 | ||
| 电弧侦测 | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| 放电时间 | < 200 msec | |||
| 测量 | ||||
| 交流/直流电压, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
| 交流电流, mA | 0.10 - 12.00 | 0.01 | ±（2% of reading + 2counts | |
| 直流电流, mA | 0.02 - 5.00 | 0.01 | ±（2% of reading + 2counts | |
| 一般规格 | ||||
| 输出电压, AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A Fast | |||
| PLC远程控制 | Input : Test , Reset Output : Pass , Fail , Processing | |||
| 内存 | 10 Sets Store/Recall of each Memory, | |||
| 显示屏 | 16×2 LCD with back light | |||
| 按键锁定 | To prevent unauthorized alteration of the test Parameters | |||
| 校验 | Build-in software and external calibrated meters | |||
| 环境 | 0-40℃, 20-80%RH | |||
| 尺寸/净重 | 280mm(W)×89mm(H)×300mm(D) / 8.4Kg | |||
| 标配附件 | ||||
| 电源线(10A) | ×1 | |||
| 保险丝 | ×3 | |||
| 高压测试线 1.5m (1101) | ×1 | |||
| 高压回路线 1.8m (1102) | ×1 | |||
