品牌
其他厂商性质
苏州市所在地
Mettler Toledo 梅特勒 在线称重 检重秤
面议
奥豪斯 CP224C 分析天平 內校
面议
日本岛津SHIMADZU AUX120电子分析天平 120g/ 0.1mg 内校
面议
日本岛津SHIMADZU TX3202L 电子精密天平
面议
日本岛津SHIMADZU 电子天平AUX220
面议
sartorius赛多利斯电子内校分析天平Quintix1102-1CN 1100g 0.01g
面议
恒平 天平 YP30KN大量称电子天平/30kg/1g
面议
EXPLORER® 准微量天平
面议
MS204 分析天平
面议
Cubis 微量天平
面议
SECURA324-1CN 天平
面议
一恒 BPC-250F 生化培养箱 微生物培养箱
面议| Resistivity at 25 °C1 | 18.2 MΩ•cm |
| TOC2 | ≤ 5 ppb |
| Particulates (size > 0.22 μm)3 | < 1 particulate/mL |
| Bacteria3,4 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)4 | < 0.001 EU/mL |
| RNases4 | < 1 pg/mL |
| DNases4 | < 5 pg/mL |
| Flow Rate | Up to 2 L/min |
| 1resistivity can also be displayed non-temperature-compensated as required by USP 2in the appropriate test conditions 3with Millipak® final filter 4with Biopak® polisher These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. | |
| Resistivity at 25 °C1 | Typically 10-15 MΩ•cm |
| TOC | < 30 ppb |
| Production flow Rate | 3 L/h (Milli-Q® Integral 3) 5 L/h (Milli-Q® Integral 5) 10 L/h (Milli-Q® Integral 10) 15 L/h (Milli-Q® Integral 15) |
| From an E-POD® dispenser with final filter, the following water quality specifications are achieved: | |
| Particulates (size > 0.22 µm)2 | < 1 particulate/mL |
| Bacteria2,3 | < 0.1 CFU/mL |
| Pyrogens (endotoxins)3 | < 0.001 EU/mL |
| RNases3 | < 0.01 ng/mL |
| DNases3 | < 4 pg/µL |
| Flow Rate | Up to 2 L/min |
| 1Resistivity can also be displayed non-temperature-compensated as required by USP 2with Millipak® final filter 3with Biopak® Polisher | |
| Feed water quality | Potable tap water as described in US-EPA, EP and WHO norms |
| Feed water connection | ½” Gaz M |
| Feed water pressure* | 1 - 6 bar |
| Feed water temperature | 5 - 35 °C |
| * For pressure above 6 bar, a pressure regulator needs to be installed upstream of the system | |
| Dimensions (H x W x D) | 500 x 332 x 484 mm (19.7 x 13.0 x 19.0 in) |
| Operating weight | 24 - 28 kg (52.9 - 61.7 lb) |
| Electric power supply voltage | 100 - 230 V +/- 10% |
| Electric power supply frequency | 50 - 60 Hz +/- 10% |
| Milli-Q® Integral main unit data connection | Ethernet (RJ45) |
| Dimensions (H x D) | 579 x 230 mm (22.8 x 9.0 in) |
| Operating weight | 4.7 kg (12.1 lb) |
| Dispenser tubing length | 0.8 m (31.5 in) |
| Distance from production unit to Q-POD® | 2.9 m (9.5 ft) |
| Electric power cable length | 2.9 m (9.5 ft) |
| Q-POD® data connection | Parallel port (25-pin D-Sub) |
