无隔板过滤器 产品特性：

* 主要用于过滤0.3um以下的空气悬浮颗粒，作为各种过滤系统的末端过滤;

* 采用超细玻璃纤维滤料，热溶胶为分隔物，专用铝型材外框，聚氨酯双组份密封胶，闭孔海绵密封条，喷塑钢网匀流板等经过严格的工艺精制而成;

* 多褶式的滤料可以形成通风气流通道，增加滤料面积和送风量，降低送风的阻力;

* 具有过滤效率高、阻力低，容尘量大，风速均匀性好，通用性强、安装方便等优点;

* 耐温80℃.耐湿80%.

* 每台无隔板过滤器在出厂前均经过逐台性能测试，保证空气过滤器的性能指标；并可按用户要求，制作各种非标准规格尺寸和过滤要求的空气过滤器;

应用：

广泛用于电子、半导体、精密机械、制药、医院、食品等行业中对洁净度要求较高的民用或工业洁净场所的末端过滤。

Mini-pleated HEPA filter

Specialty:

* Mini-pleated HEPA filter can collect 0.3 Micron or below particles and used as the terminal filtration.

* It is processed by super fine fiberglass media separated by hot-melt adhesive with double polyurethane gasket. Inside sponge can avoid any leakage. Injection molding mesh can protect the inside media very good.

* The pleated type can form a ventilation channel, increase filtration area and airflow, decrease the resistance.

* It is featured with high efficiency and dust holding, low resistance, uniform airflow, easy installation. 

* It is individually tested via PSL particle, Using MPPS (DOP Test) laser particle counting device to measure overall efficiency of the filter.

* Temperature resistance: 80℃, relative humidity is 80%.

Application:

Mini-pleated HEPA filter is widely used as terminal filter in top grade purifying equipments of Electronics Factory, semiconductor, precision mechanism, pharmaceutical factory, hospital, food sanitation etc.

技术参数：Specification

注:可根据需要定制不同规格. Note: Special Size Available Upon Request.