DP460系列是专为不同的温度，电流，电压，应变计和传感器测量应用而设计的。高精度和小规模相结合，使之成为大多数工业的理想选择。DP460 - T和DP460 - RTD温度测量机型采用了*的自动解决方案。此温度仪表适合温度传感器或热电偶温度传感器类型，J型，K可选。热电偶可以选择每通过一个小型旋转开关。没有校准需要热电偶类型之间切换。另一种选择小型DIP开关显示。DP460 -电压模型允许电流或电压与输入选择开关很容易与后面的单元访问过镜头前端。全部范围为0到20 mA，上述任何子集（例如，4至20 mA，1至5 V），可缩放。两个简单的按钮方便设置，用来设置为零（Lo），满量程（HI）和小数点。指示器的可调节范围为-999到9999显示计数。DP462可以切换到六个与多输入选择相同类型的传感器输入之间。小型旋转开关，由前面板可以方便的切换输入。人们很容易修改基本DP460模型，并添加多种输入板（DP460 - 206或DP460 - 403）。
DP460系列易于安装在标准指标483mm的机架适配器版。四个版本可用于安装1，2，3或4个指标器

The DP460 Series is designed for a variety of temperature, current, voltage, strain gage and load cell measuring applications. Excellent accuracy and small size combine to make it the ideal choice for most industrial indications.
The DP460-V voltage models allow selection between mA or voltage input with a switch easily accessible behind the snap-off front lens. Full scales are 0 to 20 mA or 0 to 10 V. These or any subset （ e.g., 4 to 20 mA, 1 to 5 V） can be scaled. Two simple pushbuttons conveniently located behind the snap-off lens are used to set zero （Lo）, full scale （Hi） and a decimal point. The indicator can be scaled within its wide -999 to 9999 display count.
The DP462 meter has the ability to switch between up to six sensor inputs of the same type with its multi-input option. A miniature rotary switch, accessible from the front panel, allows convenient switching between inputs. Sensor hook-up is a snap-on/off terminal block located at the rear of the instrument. It is easy to modify a basic DP460 model and add the multi-input board （DP460-206 or DP460-403） in the field.
The Rack Adaptor Plate permits easy mounting of DP460 Series indicators in standard 483 mm （19"） instrument racks. Four versions are available for mounting 1, 2, 3 or 4 indicators.