氙灯老化试验机

一、介绍：氙灯老化试验机又称为氙灯老化试验箱，氙灯老化机等，氙灯老化试验机的工作流程原理是通过模拟光照、温度、湿度等综合作用于试验材料。光照强度、温度、湿度都采用P.I.D+S.S.R来控制。许多的物品在长期的光照条件下都会产生降解的情况，例如荧光灯、卤素灯以及其他发光灯源，等会对物品出现光降解的情况。

氙灯老化试验机所采用的光照主要是阳光中的破坏性光波，例如UV、可见光和红外光等等。在箱体内照射强度相当于夏季强光照下的环境。

二、用途：氙灯老化试验机用于模拟阳光照射、雨露冷凝等天气状况，来测试材料在光照和潮湿环境下的耐久性能。氙灯老化试验机提供了一个模拟加速试验材料老化的光照潮湿环境，能够控制光的照射强度来达到加速试验测试效果，光的照射强度和不同的波长会影响到材料的性能稳定性。

三、如何选择：氙灯老化试验机分为水冷型和风冷型两种，风冷型好还是水冷型的氙灯老化试验机好呢？具体要看客户的使用要求以及试验标准来定，比如说汽车外饰件SAE J2527的标准就要求使用水冷型的，要求双喷淋，氙灯光谱为340nm，辐照强度要求0.55W/m2。

风冷氙灯老化机的灯管为水平安装，而水冷型为垂直安装；风冷型测试产品为水平摆放，而水冷型测试产品为垂直摆放，切割摆放在样板上，风冷型氙灯老化机相对于水冷型更为经济，结构也相对简单，使用时只需要保证用去蒸馏水即可，而水冷型则需要用到冷水机和纯水机，安装使用方面相对复杂些。

科赛德品牌氙灯老化试验机主要功能元器件均采用世界配置（含金量高）、主要功能元器件均采用具有水平的件，零部件的配套与组装匹配性好，技术原理*可靠、噪音与节能得到控制，提高了产品的安全性和可靠性，能保证用户长时间、高频率的使用要求。

四、氙灯老化试验机规格参数：
1、型号：KSD-XD-150
2、内箱容积：500x600x500mm(WXHXD)
3、外型尺寸：1100x1800x900mm(WXDXH)
4、型号：KSD-XD-225
5、内箱容积：500x750x600mm(WXHXD)
6、外型尺寸：1100x1900x1000mm(WXDXH)
7、型号：KSD-XD-512W
8、内箱容积：800x800x800mm(WXHXD)
9、外型尺寸：1300x1950x1350mm(WXDXH)
10、氙灯波长：200-800nm
11、光谱范围：340nm；或300-400nm
12、辐照强度：0.2-0.57W/M2
13、氙灯功率：2.5KW/支（风冷型）；6.5KW/支（水冷型）
14、辐照强度测量：带太阳眼，自动测控
15、黑板温度范围:30℃～120℃ 可调
16、温度波动度:±0.5℃
17、温度均匀度:≤±2℃
18、黑暗周期湿度:95%R.H±5%R.H
19、光照周期湿度范围:30%R.H～75%R.H 可调
20、湿度度偏差:±5%R.H
21、暗周期、辐照周期:0～9999H 可调
22、淋雨周期:0～9999min 可调
23、喷头：正面喷淋（水冷）

五、氙灯老化试验机符合的试验标准：
AATCC TM169
Weather Resistance of Textiles: Xenon Lamp Exposure
ASTM C1257
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C1442
Standard Practice for Conducting Tests on Sealants Using Arificial Weathering Apparatus
ASTM C1501
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C732
Standard Test Method for Aging Effects of Arificial Weathering on Latex Sealants
ASTM C734
Standard Test Method for Low-Temperature Flexibilit of Latex Sealants After Artfcial Weathering
ASTM C793
Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
ASTM D1148
Standard Test Method for Rubber Deterioration- -Discoloration from Ultraviolet (UV) or UVNisible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D1670
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D2565
Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D3424
Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D3451
Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D4101
Standard Specication for Polypropylene Injection and Extrusion Materials
ASTM D4303
Standard Test Methods for Lightfastness of Pigments Used in Artists’ Paints
ASTM D4355
Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
ASTM D4434
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
ASTM D4459
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
ASTM D4798
Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4811
Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM D5010
Standard Guide for Testing Printing Inks and Related Materials
ASTM D5019
Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
ASTM D5071
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D5383
Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
ASTM D5398
Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
ASTM D5819
Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D6083
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
ASTM D6551
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM D6577
Standard Guide for Testing Industrial Protective Coatings
ASTM D6662
Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
ASTM D6695
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D6878
Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
ASTM D7869
Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM F1164
Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
ASTM G151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G155
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic MaterialsFLTM Bo 116-01Resistance to interior weathering
GBT 8427
Textiles – Tests for color fastness – Color fastness to artificial light: Xenon arc fading lamp test
GM 9125P
Procedures for Laboratory Accelerated Exposure of Automotive Materials
GME 60292
Designation of Colour Fastness and Resistance to Artficial Light
GMW 14162
Colorfastness to Artificial Weathering
GMW 14650
Performance Requirements for Exterior Plastic Parts
GMW 3414
Test Method for Artificial Weathering of Automotive Interior Trim Materials
IEC 61345
UV test for photovoltaic (PV) modules
ISO 105-B02
Textiles – Tests for colour fastness – Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B04
Textiles – Tests for colour fastness – Part B04: Colour fastness to weathering: Xenon arc test
ISO 105-B06
Textiles – Tests for colour fastness – Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B10
new standardTextiles – Tests for colour fastness – Part B10: Artificial weathering – Exposure to filtered xenon-arc radiationISO 11341

Paints and Varnishes – Artificial Weathering and Exposure to Artifcial Radiation- Exposure to Filtered Xenon-Arc Radiation
ISO 12040
Graphic technology – Prints and printing inks – Assessment of light fastness using fitered xenon arc light
ISO 16474-1
Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance
ISO 16474-2
Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps
ISO 18909
Photography – Processed photographic colour films and paper prints – Methods for measuring image stability
ISO 3917
Road vehicles – Safety glazing materials – Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
ISO 4892-1
Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance
ISO 4892-2
Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources
JASO M346
Light-exposure test method by xenon-arc lamp for automotive interior part
JA SO M351
Automotive parts – Accelerated weathering testing method by xenon-arc lamp for exterior parts
JISB 7754
Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type)
JIS D 0205
Test Method of Weatherability for Automotive Parts
MIL-STD 810F
Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.4: Solar radiation (Sunshine)
MIL -STD 810G
Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.5: Solar radiation (Sunshine)Peugeot Citroen (PSA)
D47 1431
Materials and Parts in the Passenger Compartment Appearance Behaviour to Arificial Light at High and Mean Temperatures
SAE J1885
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
SAE J1960
Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus
SAE J2412
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
SAE J2413
Protocol To Verify Performance of New Xenon Arc Test Apparatus
SAE J2527
Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irrdiance Xenon-Arc Apparatus
VDA 621429
Tests for automotive coatings – Weathering test for colour fastness
VDA 621430
Tests for automotive coatings – Test for resistance to cracking of 2 layer metallic clear coats
VDA 75202
Automotive interior materials – Colourfastness and ageing test against light at high temperatures: Xenon arc
VW PV 3930
Non-Metallic Materials – Weathering in Moist, Hot Climate