*适用于袖山缝粘合压熨。

*PLC可编程控制器控制及人性化操作界面触摸显示屏操作。

*采用增压缸二次加压，压力比普通气缸大数倍的压力，加压压力，可调节，适合各种衬衫面料和胶条。

*上模加热采用三个独立数字式温度控制器控制,温度控制更精确。

*下模气袋再配合细胶条(耐高温、高压)，可消除模与衬衫袖侧缝形状间的偏差，配合不同布料达到压熨效果独立真空泵有助衣物定位冷却定型效果佳。

*独立真空泵，有助衣物定位、冷却、定型效果佳。

*备不同的袖山模，订购时需说明要求。

* Suitable for armhole fusing and ironing

* Adopt PLC and human friendly touch screenfor operation

*The secondary pressure of the booster cy1inder. is used， and the pressure is several times greater than that of the ordinarycylinder. Pressure, pressurization pressure, adjustable， suitablefor various shirt fabrics .

* Apply three independent digit thermostatsfor controlling the temperature of the upper mould more accurately

* Combination of air bag of the lower mouldａnd rubber strips (resistant to high temperature and high pressure )willcompletely offset the shape tolerance between the mould and sleeve side seam.Furthermore, it can help different fabrics to achieve the best pressing effect.

* Equipped with independent vacuumingsystem for fixing cooling and shaping the garment

* Different armhole moulds are available,you have to write down your requirement when you place an order.