ZYRS-A针焰燃烧试验仪

ZYRS-AZYRS-A针焰燃烧试验仪

参考价: 面议

具体成交价以合同协议为准
2023-10-18 16:04:02
6
产品属性
关闭
北京艾诺德仪器有限公司

北京艾诺德仪器有限公司

免费会员
收藏

组合推荐相似产品

产品简介

GB/T5169.5-2008、GB4706.1-2005 ,IEC6 0695-2-10、IEC60695-2-13《灼热丝/,基本试验方法,灼热丝试验装置和通用试验程序》和UL746A、IEC829 DIN695、VDE0471、或者ASTM-3874-2004等的标准规定

详细介绍

针焰燃烧试验仪     


满足标准:GB/T5169.5-2008、GB4706.1-2005 ,IEC6 0695-2-10、IEC60695-2-13《灼热丝/,基本试验方法,灼热丝试验装置和通用试验程序》和UL746A、IEC829 DIN695、VDE0471、或者ASTM-3874-2004等的标准规定 

针焰燃烧试验仪   

主要性能参数: 

项目名称 
 主要参数 
 
针状燃烧器 
 内孔?0.5mm±0.1mm,外径≤?0.9mm,长≥35mm 
 
燃烧器角度 
 可垂直(调节和测量火焰高度时)和倾斜45°(试验时) 
 
引燃铺垫板 
 厚10mm的松木板外覆标准绢纸(12g/m2~30g/mm2) 
 
施燃气体 
 95%丁烷气(基准气),也可使用丙烷气 
 
燃气焰温梯度 
 从100℃±2℃~700℃±3℃用时23.5s±1.0s(需用温度校准装置验证) 
 
火焰高度 
 12mm±1mm(可调节) 
 
试验时间和持燃时间 
 1s~999.9s数显可预置 
 
温度校准验证装置(选件) 
 进口仪表自动控制或手动秒表控制,配φ4mm,0.58±0.01g标准铜头 
 
温度校准验证用热电偶(选件) 
 ?0.5mm,K型,进口绝缘式耐高温铠装热电偶 
 
简易供气装置(选件) 
 进口瓶装丁烷装夹和供气装置改装,简单实用 
 
输入电源 
 220V/50~60HZ/500VA 
 
外型尺寸 
 0.5立方:宽1120mm×深520mm×高1250mm 
 
 
关于更多 针焰燃烧试验仪    详细资料请您

 

Needle flame test apparatus
Meet the standards: GB/T5169.5-2008, GB4706.1-2005, IEC6, 0695-2-10, IEC60695-2-13 "hot wire / hotline, basic test method, test apparatus and general provisions glow wire test procedures" and UL746A, IEC829 DIN695, VDE0471, or ASTM-3874-2004 standard
Needle flame test apparatus
The main performance parameters:
Project name
The main parameters
Needle burner
Inner hole? 0.5mm ± 0.1mm, diameter 0.9mm, length 35mm ≥ ≤?
Burner angle
Vertical (regulation and measurement of flame height) and the inclination of 45 degrees (test)
Ignite the lay plate
Pine wood with standard silk paper thickness 10mm (12g/m2 ~ 30g/mm2)
Application of gas
95% butane gas (reference gas), also can use propane gas
The gas flame temperature gradient
From 100 ± 2 ℃ ~ 700 ℃ ± 3 ℃ for 23.5s ± 1.0s (verification with a temperature calibration device)
The flame height
12mm + 1mm (adjustable)
The test time and the burning time
1s ~ 999.9s display can be preset
Temperature calibration device (optional)
Import instrument automatic control or manual stopwatch control, with the diameter of 4mm, 0.58 ± 0.01g standard copper head
Thermocouple for temperature calibration and validation (optional)
? 0.5mm, K, imported insulation type high temperature resistant armoured thermocouple
Simple gas supply device (optional)
Imported bottled butane clamping and gas supply device refit, simple and practical
The input power
220V/50~60HZ/500VA
Appearance size
0.5 cubic: width 1120mm * 520mm * 1250mm
Needle flame test instrument for more detailed information please call Advisory

上一篇:落锤式冲击试验机使用说明与分析数据 下一篇:冲击试验机(12m/6m)/ 冲击试验器(12m/6m) 型号:TC-MCJ-12/6
提示

请选择您要拨打的电话: