北京艾诺德仪器有限公司，致力于打造中国仪器航母品牌。
北京艾诺德仪器有限公司是集专业设计、开发、生产与销售于一体的*股份制企业，专注于新型材料试验机的研制、材料检测技术的提高及材料试验方法的创新，是国内的材料试验检测仪器的生产企业。

总悬浮颗粒物采样器
智能TSP-PM10中流量采样器 总悬浮颗粒物采样器 大气总悬浮颗粒物TSP样品采集器
型号G80449
总悬浮颗粒物采样器
执行标准
执行标准JJG943-1998《总悬浮颗粒物采样器》
HBC3-2001《环境保护产品认定技术要求总悬浮颗粒物采样器》
用途：
《G80449
 
总悬浮颗粒物采样器
型智能TSP-PM10中流量采样器》是按照HBC3-2001环境产品技术要求及JJG943-1998检定规程在总结国内外同类产品优点的基础上研制的。该仪器是用于环境监测部门采集大气中总悬浮颗粒物TSP样品的*仪器。
总悬浮颗粒物采样器
特点
本产品结构合理，控制手段*，使用调试简单，是一集机械，电子、微电脑多项新技术而成的*精密仪器，是环保行业大气颗粒物采样的有力工具。
该仪器更换选配的切割器后，还可以进行PM10可吸入颗粒物采样。PM10撞击式切割器是根据HJ/T93-2003标准研制。采集空气中空气动力学当量质量中粒径小于等于10μm的悬浮颗粒物。
1.控制手段*，使用调试简单
2.孔板流量传感器与微电脑流量控制，智能化程度高
3.实时时钟，可定时采样、间隔采样
4.停电记忆数据，来电自动恢复采样
5.更换选配的切割器后，可以进行PM10可吸入颗粒物采样
6.无刷电机，*运行大于8000小时
四、总悬浮颗粒物采样器
技术指标
1.流量范围：80—130L/min,连续可调
2.流量精度：100L/min（对应TSP切割器入口流速为0.3m/s≤±2%）
3.滤膜有效面积：Φ80mm。
4.计时精度：≤±1‰
5.累计流量：0000～9999m3
6.累计时间：00:00～99h:59min
7.噪声：≤62dB（A）
8.工作电压：AC220V±10%50Hz
9.计前温度：-20℃~50℃
The product description

Inligent traffic in TSP, PM10 samplers total suspended particle sampler atmospheric total suspended particulate matter the TSP sample collector

Model G80449

Execution standard

Execution standard JJG943-1998 "the total suspended particulate matter sampler"

HBC3-2001 "environmental protection product that technical requirements for total suspended particles sampler"

USES:

The G80449
 
Type inligent traffic in TSP, PM10 sampler is according to the HBC3-2001 environmental product technical requirements and JJG943-1998 verification regulation on the basis of summarizing the advantages of similar products at home and abroad. This instrument is used for environmental monitoring departments acquisition of suspended particulate matter in the atmosphere of TSP samples necessary instruments.

The characteristics of

With reasonable structure, advanced control means, using the debug is simple, is a collection of machinery, electronics, microcomputer a number of new technologies and advanced precision instruments, is a powerful tool for atmospheric particulate matter sampling the environmental protection industry.

The equipment replacement after selection of the cutter, also can undertake PM10 samples of particulates. PM10 impact cutter is developed according to HJ/T93-2003 standard. Acquisition of the quality of air in the air dynamics equivalent diameter less than or equal to 10 microns of suspended particulate matter.

1. The advanced control methods, the use of debugging is simple

2. The orifice flow sensor and flow control of the microcomputer, inligentize degree is high

3. The real time clock, time sampling, the sampling interval

4. Power failure memory data, ephone automatic recovery sampling

5. Change the selection of the cutter, can undertake PM10 samples of particulates

6. Brushless motor, trouble-free operation is more than 8000 hours

Fourth, technical indicators

1. The flow range: 80-130 l/min, continuously adjustable

2. The accuracy of flow rate: 100 l/min (TSP cutters entrance velocity of 0.3 m/s plus or minus 2% or less)

3. The membrane filter effective area: Φ 80 mm.

4. The timing precision: plus or minus 1 per thousand or less

5. The total flow rate: 0000 ~ 0000 m3

6. Total time: 00:00 ~ 99 h: 59 min

7. Noise: 62 db (A) or less

8. Working voltage: AC220V plus or minus 10% 50 hz

9. Before temperature: - 20 ℃ to 50 ℃
 

：         

售后服务承诺：
　　1、服务宗旨：快速、果断、准确、周到、*
　　2、服务目标：服务质量赢得用户满意
　　3、服务效率：保修期内或保修期外如设备出现故障，供方在接到通知后，1-3个工作日内予以解决。 用户可以通过售后咨询有关技术问题，并得到明确的解决方案
　　4、服务原则：仪器仪表产品保修期为1年，在保修期内供方将免费维修和更换属质量原因造成的零部件损坏，保修期外零部件的损坏，提供的配件只收成本费，由需方人为因素　　造成的设备损坏，供方维修或提供的配件均按成本价计。