MS高速瓦楞纸板生产线

功能介绍：

瓦楞纸板生产线包括轧辊的立场、过胶机、预热器、输送机和堆垛机的桥梁，分压机。我们可以单壁制造，双层和三墙板生产线有效宽度：400毫米2500mm，6生产速度:100-250m/分钟。

Corrugated cardboard production line includes gluing machine, pre-heater, con-veyer bridge， machine and stacker.

We can manufacture the single wall, double wall board production line.

Available width:1400mm-2500mm.

Production speed:100-250m/min.

MS-L-380T双楞单面机

MS-L- 380 T DOUBLE STARE BLANKLY SINGLE MACHINE

用途与特点:

设计速度:200m/min.有效宽幅:1400mm-2500mm令主楞辊:} 380mm(根据楞型不同而有所不同)

压力辊:} 385mm预热辊:}400mm0.一台机有两组瓦楞辊，工作时可随意选择一组另一组预热备用快速更换楞型令占地面积小(同类产品要实现此种功能熏要两台单面机占地面积大)

整机PLC控制触摸屏显示运行参数.操作方便令真空吸附式单面瓦楞机上下瓦楞辊采用优质台金钢.

经热处理硬度HRC580  -600令表面经研磨及镀铬处理或采用碳化钨瓦楞辊

独立驱动箱，五轴传动，硬齿面齿轮，油泵淋油润滑，减少噪音，

运转平稳，延长齿轮的使用寿命

上胶!厚度采用电动推杆调整，隔胶装!电动。涂胶部在主机停止时独立运转，防止浆糊枯竭。上胶机构位移气动控制。

EQUIPMENT下ECHNICAL SPECIFICATIONS

Design speed: 200 m/min今Effective wide: 1400 mm - 1400 mm

The main roller: phi 380 mm (varies according to different type stare blankly). The pressure roller: preheat roll phi 385mm: phi 400 mm

A machine has two groups of corrugated roller, can choose a set of random al work, another set of type quick preheating spare change stare blankly

Cover an area of an area small, similar products to achieve this feature requires two single-sided machine, covering an area of large)

The machine PLC control, touch screen operation parameters, operation is convenient

Vacuum adsorption type single face corrugated machine. Corrugated roller is made of high quality alloy steel, after heat treatment hardness hrc58 0, 60“

Grinding and chrome plated treatment on the surface, or use tungsten carbide corrugated roll Independent drive box, five shaft driving, hard tooth surface gear, pump spray lubrication, reduce noise, smooth operation, prolong the service life of gear.

The gluing quantity thickness is adjusted by electric putter, electric insulation glue device, coating department on the host stops running independently, to prevent the paste to dry up

The gluing displacement pneumatic control

MS-M-380S (405S)吸附式单面机

MS-M一380一S (405 S)ADSORPTION TYPE SINGLE MACHINE

用途与特点:

3805设计速度:200m/min 4055设计速度:220m/min

有效幅宽:1400mm-2500mm楞辊cp380mm

真空吸附式单面瓦楞机。上下瓦楞辊采用优质52CrM。台金钢.经热处理硬度HRC58-600，表面经研磨及镀铬处理。

本机内装有面纸预热辊及芯纸调制喷气装置。

上下瓦楞辊座与整机分离设计，可整体吊装更换，方便更换楞型

涂胶辊及定糊辊设计成组导轨滑移拆装，缩短维修时间。

上瓦楞辊、压力辊及上胶辊升降以气压控制。

变频电机主传动，独立驱动箱，三轴传动，由变频器控制瓦楞机的加减速，达到节能更为日后生产管理留下通讯接口

闭式齿轮传动油浸润滑，减少噪音，运转平稳，延长齿轮的使用寿命。

采用电动隔浆装置，涂胶部在主机停止时独立运转，防止浆糊枯竭，电动调整数显胶f或手动调整上胶皿。上下瓦楞辊及压力辊轴承均采用高温润滑脂，以确保轴承寿命、运转顺畅。

EQUIPMENT TECHNICAL SPECIFICATIONS

3805 design speed', 200 m/min 405 s design speed: 220 m/min effective width: 1400 mm -2500 mm stare blankly roller phi 380 mm.

Vacuum adsorption type single face corrugated machine. 52 crmo fluctuatio一roller Is made of high quality alloy steel, after heat treatment hardness HRC58-60 0, polishing and chrome plated on the surtace treatment

Inside the machine is equipped with surface paper preheat roll and care paper modulation jet device

Corrugated roller up and down separated from the engine design, can change integral hoisting, convenient change stare blankly

Coating design group and set the paste roller guide rail sliding tear open outfit, shorten the maintenance time

On the corrugated roller, pressure roller and glue roller lift with pneumatic control

Main drive, frequency conversion motor drive box independently, three axis transmission, corrugated machine is controlled by inverter deceleration, communication interface to achieve energy saving more production management in the future

Closed gear oil bath lubrication, reduce noise, smooth operation, prolong the service life of gear

The use of electric isolation device, glue on the host stops independent operation to prevent the paste dried up, electric adjustment digital display amount

Top and bottom corrugated roller and pressure roller Gearing adopts high temperature grease, to ensure the bearing life, smooth operation

MS-N-320S(360S)吸附式单面机

SF一320一S (360 S)ADSORPTION TYPE SINGLE MACHINE

用途与特点:

SF320S设计速度:120m/min SF360S设计速度:150m/min

有效幅宽:1400mm-2500mm楞辊:}p320 C}p360) mm

驱动减速箱采用油浸润滑，减小噪音，万向节传动，隔离动力源(选装)

上瓦辊、压力辊、涂胶辊升降，均已气动控制

导纸方式采用真空吸附，带风童调节装置，保持高速状态下瓦楞楞型的稳定。

瓦楞、压力辊轴承均采用耐高温润滑脂润滑

涂胶部采用自动循环供胶

上下瓦楞辊采用520rMo优质合金钢，经热处理，硬度在HRC58-60口袭面经研磨

手动或电动隔胶装置口

涂胶部停机可独立运转或不独立运转两种方式口

EQUIPMENT TECHNICAL SPECIFICATIONS

SF320S design speed: 120 m/mln SF360S design speed: 150 m/mln

The effective width: 1400 mm -2500 mm roller: 320 (360) mm

Drive reducer using oil bath lubrication, reducing noise, cordon drive, isolated power supply (optional)

On tile roller, pressure roller, glue roller lift, have been pneumatic control

Using vacuum adsorption, leading paper with air conditioning, maintain the stability of the state of corrugated type stare blankly at a high speed

Corrugated board, pressure roller bearing adopts high temperature lubricating grease

Using automatic cycle for rubber coating department

And corrugated roller is made of 52 crmo high quality alloy steel, after heat treatment, hardness on the surtace HRC58-60 0 to grind

Manual or electric insulation glue device

Glue the downtime can be independent running or not running in two ways

MS-O-280S吸附式单面机

MS-O一280 S ADSORPTION T丫PE SINGLE MACHINE

用途与特点:

设计速度:80m/mina

有效幅宽:1400mm---2200mmo

楞辊:cp280mm o

驱动减速箱采用浸油润滑，减少噪音，万向节传动，隔离动力源。

上瓦辊、压力辊、涂胶辊升降、均以气动控制。

导纸方式采用真空吸附，带风量调节装置，保持高速状态下瓦楞楞形的稳定。

瓦辊压力辊轴承采用耐高温润滑脂润滑。

涂胶部采用自动循环供胶。

上下瓦楞辊采用520rMo优质铬相合金钢，经热处理，硬度在日RC58-60“表面经研磨。

涂胶辊表面经过网纹刻花及镀铬处理。

手动或电动隔胶装i。

涂胶部停机可独立运转或不独立运转两种方式，主电机变频控制(选装)。

EQUIPMENT TECHNICAL SPECIFICATIONS

Design speed: 80 m/min

Effective width: 1400 mm一2200 mm

Roll: phi 280 mm

Drive reducer with immersion oil lubrication, reduce noise, cardan drive, isolated power supply

On tile roller, pressure roller, glue roller Ilft, all with pneumatic control

Using vacuum adsorption, leading paper with air conditioning, maintain the stability of high speeds corrugated stare blankly shape

Tile roller pressure roller bearings using high temperature lubricating grease

Using automatic cycle for rubber coating department

And corrugated roller adopt 52 crmo high quality chromium molybdenum alloy steel,after heat treatment, hardness on the surface HRC58-60 0 to grind

Rubber roller surface treated with reticulate hand-cut and chrome plated

Manual or electric insulation glue device

Glue of downtime can be independent running or not running in two ways, main motor frequency conversion control (optional)

MS-P重型液压无轴支架

MS-P HEAVY DUT丫HYDRAULIC BRACKET

用途与特点:

采用双辊筒对称四支臂结构，可同时支撑两卷原纸。

通过液压控制纸卷升降，电动机械控制纸卷加紧纠偏。

采用意大利进口多点式刹车装置，自动膨胀式夹纸头，减少纸张浪费。

支撑原纸幅宽:1200-2800mm

支撑原纸直径cp1500mm

支撑重量5t

主轴:cp270mm

EQUIPMENT丫ECHNICAL SPECIFICATIONS

With double roller symmetrical four arm structure, at the same time support two volumes base paper

Through hydraulic control paper roll lift, electric machinery control paper roll press rectification.

Using imported Italian multipoint brakes, automatic expansion type paper, reduce the waste of paper.

Support base paper width: 1200-2800一mm

Support base paper biggest phi 1500 mm in diameter

Support maximum weight 5 t.

Spindle: cp270 mm

MS-Q型电动无轴纸架

MS-Q T丫PE ELECTRIC SHAFTLESS PAPER PLANE

用途与特点:

支撑原纸直径1400mmo

支撑重量2t o

采用单滑道对称四支臂结构，可同时支撑两卷原纸。

装有圆盘式手动制动器，可随时调整原纸张力。

支臂的加紧，旋转机械设有衡定扭力离合器，操作安全可靠。

EQUIPMENT TECHNICAL SPECIFICATIONS

Support base paper 1400 mm in diameter.

Support maximum weight 2 t.

Adopts single slide symmetrical four arm structure, at the same time support two roll of base paper.

Equipped with manual brake disc type, can adjust the tension of base paper.

To arm, rotating machinery is equipped with uniform torsion clutch, safe and reliable operation

M S -R系列预热缸

MS-R SERIES OF PREHEATING C丫LINDER

用途与特点:

预热辊直径:cp600mm, cp800mm. cp900mm, cp1100mm任选。

有效幅宽:1400mm-2200mm 0

电调包角，调整范围600-27000

各辊表面经精密磨削镀硬铬处理，光洁，耐用。

采用蝶形封头或平头设计，保证原纸受热均匀。

可单层或多层配置。

EQUIPMENT TECHNICAL SPECIFICATIONS

Preheat roll diameter: phi phi phi phi 800 mm to 800 mm, 600 mm, 1100 mm optional.

The effective width: 1400 mm一1400 mm.

Electrical switch Angle, adjusting range 60 0-270“.

The roll surface by precision grinding hard chromium plating processing, bright and clean, durable

The butterfly head or flat design, ensure the base paper heated evenly.

Can be single or multi-layer configuration.

MS-T型二重涂胶机

MS-T DOUBLE GLUE MACHINE

用途与特点:

设计速度:200m/min o

涂胶辊表面记刻有特殊网纹。镀硬铬处理，涂胶均匀，耗胶量少

涂胶辊的转动由变频器控制，由变频器控制保证涂胶辊的线速与双面机同步，又可以独立运转。

电动调整数显胶量或手动调整上胶量

压纸辊采用启动上升，间隙由电动微调

自动循环供胶，能有效控制胶量，避免胶水沉淀，保证良好的胶水和节约胶水。

可选择压辊加压或弹性触压棒加压方式。

EQUIPMENT TECHNICAL SPECIFICATIONS

Design speed: 200 m/min.

Rubber roller surface engraved with special checker. Hard chromium plating processing, uniform coating, glue consumption quantity is little.

Glue roller rotation is controlled by frequency converter, the inverter control to ensure that the glue roller line speed synchronization with double-sided machine, can operate independently.

Electric adjustment digital display amount or manually adjust the gluing quantity

Pressure roller adopt start rising, clearance by electric

Automatic cycle for the glue, can effectively control the glue amount, avoid glue precipitation,ensure good glue and glue saving.

Can choose roller pressure or elastic contact pressure mode.

MS-U电脑横切机

MS-U COMPUTER CROSS-CUTTING MACHINE

用途与特点:

合理的机械结构，刚性强、稳定性好、使用寿命长;

所有操作控制在同一侧面，操作方便，光电计数;

切纸范围纵切四刀，横切400-2400mm o

切纸精度士2.5mm o

EQUIPMENT TECHNICAL SPECIFICATIONS

Reasonable mechanical structure, strong rigidity, good stability, long service life;

All operating controls on the same side, easy to operate, photoelectric counting;

Paper cutting range four knife slitting, crosscutting 400-2400 mm。

Paper cutting accuracy士2.5 mm.

MS-W升降型薄刀机电动调刀型

MS-W TYPE THIN BLADE MACHINE ELECTRIC ADJUSTABLE BLADE TYPE

用途与特点:

采用五点压线，压痕间隙同步调整。线性美观，不爆线，由于折弯

磨刀装置采用自动和手动两种气动磨刀方式，边磨刀边工作，提高工作效率

电动升降电动纠偏，操作简单实用，适用不同生产线的需要。

采用变频电机变频器，与生产线同步精度高。

电器采用国内或进口产品，性能可靠。

EQUIPMENT TECHNICAL SPECIFICATIONS

Use five line pressing, indentation clearance synchronous adjustment. Linear and beautiful, not line, due to the bending.

Automatic knife grinding device and manual two kinds pneumatic grinding way, knife while working, improve work efficienc

Electric hoist electric correction, the operation is simple and practical, applicable to the needs of different production line.

Use famous inverter frequency conversion motor, and the production line of high precision

Electric used domestic famous brands or imported products, reliable performance

MS-X普通型薄刀机

MS-X ORDINARY THIN BLADE MACHINE

用途与特点:

采用前压线送纸。后双胶袖牵线，纸板运行平稳

分切部:采用优质鸽钢台金刀片，刀锋锋利，使用寿命长，分切出的纸板切口整齐，无压裂，毛刺

压痕部:采用五点压线，压痕间隙同步调整。线型美观，不爆线，易于弯折

电动纠偏:操作简单实用，适应不同生产线的需要

磨刀装置采用电动和手动两种气动磨刀万式。边磨刀边工作，提高工作效率.

电器采用国内或进口产品，性能可靠。

EVUIPMENI花CHNICAL SPECIFICATIONS

AHerbyfalmerprwsee.llne paper, double roller,sldngs,cardboard smooth operation

CNHng depeMaenH adopt吻h qualify Wngsfen alloy blades,Ihe blade sharp,lonA servlcelife and cuffing out the cardboardinclsion neafly,withcuflracturipq,burr.

Line presalaqlndenteflon depBllmenCthe hve,areaslnH clearance synchronous edJustmenL Llneerａnd eaufllu nooline.easyto bend

Elechic wrredlon: the operefion is simple, prectlcel, end adapt to the needs of dferent production Ilne

Knife grinding device ofelechia and manuallwo k7nds pneumatic grlndinA way, knife whileworkinA=Impmve work eHlciency

Eleplric used domeslicfamous brands orimporfed producls,reliabls performance

MS-Y电动调刀型薄刀机

MS一丫ELECTRIC KNIFE T丫PE THIN KNIFE MACHINE

用途与特点:

采用前压线送纸，后双胶轴牵线，纸板运行平稳。

采用电动调整刀距，气动自动锁紧，提高机器的自动化程度。使用方便，调整准确.劳动强度。

分切部:采用优质钨钢合金刀片，刀锋锋利，使用寿命长，分切出的纸板切口整齐，

压痕部采用五点压线，压痕间隙同步调整，线性美观，不爆线，易于弯折。

磨刀装里采用自动和手动两种气动磨刀方式，边磨刀边工作，提高工作效率。

电器采用国内品牌或进口产品，性能可靠。

EQUIPMENT TECHNICAL SPECIFICATIONS

Using electric adjusting clearance, start the automatic locking, improve the degree of automation of the machine.丁he precise easy to use, adjustment, save time, reduce the labor intensity.

Cutting department: adopt high quality tungsten alloy blades, the blade sharp, long service life and cutting out the cardboard incision neatly, without fracturing, no burr

Line pressing indentation deparUnent adopts fve, creasing Gearance synchronous adjustment, linear and beautiful, not line, easy to bend

Automatic knife grinding device and manual two kinds pneumatic grinding way, knife while working, improve work efficiency.

Electrical appliances used domestic brａnd or import product, reliable in pertormance.