APSⅠ全电脑型水性印刷开槽模切机

APSⅠ CNC Flexo Printing Slotting Die-cutting Machine

特点：

v        整台机器是按照高要求，高速度，高效率，可靠性及安全性而设计制造，快速换单，操作方便。

v        选用优质材料及配件。

v        传动齿轮加硬，研磨而成，洛氏硬度50~55。

v        自动归零，自动复位。

v        所有间隙电脑或电动调整。

v        应用免键连续环，减少中心磨损，虚位放大，保持长时间印刷套准。

v        所有辊轴镀铬，增加强度。

v        采用进口PLC、触摸屏多功能控制。

v        可储存常用订单，加快换单操作。

v        全部电器，电子及气动元件均采用欧洲标准。

Features:

v        The machine is designed and made for high quality, high speed, high efficiency, high stability and high safety, convenient for quick order update and operation.

v        Made with high quality materials and parts.

v        Well hardened and ground transmission gears with hardness 50~55 （HRC）.

v        Auto zero return and auto reset.

v        All gaps between cylinders and rollers are computerized or motorized adjustment.

v        Key-free connection rings to reduce central wear, to keep stable precise printing.

v        All cylinders and rollers are hard chromed for ideal hardness.

v        Use imported PLC. PLC touch screen for multifunctional control.

v        Being able to save daily orders to speed up the order update.

v        All electric, electronic and pneumatic components are of  European standards.

送纸部：

v        采用德国进口伺服控制前缘送纸装置。

v        真空吸附装置，吸风量可视纸板尺寸，弯曲程度做适当调整，确保供纸平稳准确。

v        电动控制机体离合，附警铃，行进时持续响铃，确保操作人员安全。

v        每台之间，有急停开关，可由内部控制机台的移动，确保内部操作人员的安全。

v        传动轴附摩擦式离合器，避免错误动作而损坏机器。

v        气压式连锁装置。

v        主机马达启动保护装置（机台未锁固时，主机无法启动运转）。

Feeding Unit

v        Lead feed system with four-shaft structure is controlled by servo, imported from Germany.

v        Vacuum suction system. The air volume can be set in accordance with different paperboard bending conditions so as to feed paper smoothly.

v        Every unit equips with an emergency stop switch to control the section movement from inside to guarantee the operators' safety.

v        All units of the machine can be separated automatically and an alarm sounds during opening and closing for safe operation.

v        The frictional clutch is installed on transmission shaft to avoid damaging machine due to incorrect actions.

v        Pneumatic interlock device.

v        The main motor activates the protection device. .If the unit is not locked, the main motor can not start.

印刷部：

v        印刷辊选用优质钢板，表面研磨，镀硬铬。

v        快速换版装置，节省时间。

v        印刷压辊间隙采用电脑调整，数字设定。

v        配合适纸系统气压自动升降装置（送纸时网纹辊下降与印版接触，停止送纸时网纹辊上升与印版分离）。

v        相位调整机构，行星式齿轮构造。

v        印刷相位采用PLC、触摸屏控制，电机360度调整（运转、停止均可调整）；可储存订单。

v        印刷相位固定装置，电磁离合器制动式刹车机构。当机组分离或调整时，刹车机构限制机台转动，保持原有齿轮位置固定点。

v        清洗印版后自动复位系统。

v        电动数字调整横向位置，调整距离共20mm。

v        钢制网纹辊：钢管表面研磨，压制网纹，镀硬铬。

v        橡胶辊：钢管表面包裹耐磨橡胶，橡胶辊中搞特殊研磨，传墨效果好。

v        陶瓷网纹辊（选配）：钢管表面覆盖陶瓷研磨，激光雕刻网纹，比钢制网纹辊耐磨，寿命长。

Printing Unit

v        The cylinder is made of good steel board and its surface is plated hard chromium after it is grinded.

v        Quick hanging forme device can save more time.

v        Adjusting clearance of impressing roller by computer, and digital setting.

v        Anilox roller matchs with feeding system up and down automatically to protect forme and reduce the waste of cardboard.

v        Printing phase is controlled by PLC and touch screen and can be reset electrically with 360 degree adjustment （no matter running or stopping）,and be able to store orders.

v        Regulating printing phase position is motorized by planetary gear system and digital displays.

v        Resetting automatically after cleaning the forme

v        Transversal movement regulating by motor covers 20mm.

v        Steel anilox roller: Surface of the roller is plated hard chromium after it is grinded and knurled.

v        Rubber roller: The steel roller is covered by anti-abrasion rubber, and the middle of the rubber roller is high than two sides to ensure much well printing ink transfer.

v        Ceramic anilox roller: Surface of the roller is covered with ceramic after it is grinded and knurled by laser. The life of ceramic anilox roller is more than that of steel one （ Enabling to be provided）.

开槽部：

v        预压辊、压线轮、开槽刀座横移位置采用PLC、触摸屏控制；可储存订单。

v        开槽相位调整机构，行星轮齿轮构造。

v        开槽相位采用PLC、触摸屏控制，电动数字式360度调整（运转、停止均可调整）。

v        控制面板配有10.4英寸触摸屏。

v        平衡校正，增加运转稳定性。

v        预压轮：经预压线后的纸板不易压破。

v        上压线轮包裹优力胶，不会损坏纸板。

v        开槽刀宽7mm，合金钢材质，经热处理研磨齿形开槽刀，双片式修边，刀口锋利，精密度高。

Slotting Unit

v        Transversal movement of slotting knife, pre-pressing wheel and creasing wheel are controlled by PLC and touch screen. Being able to store orders.

v        The structure of regulating slotting phase is planetary gear system.

v        Slotting phase is controlled by PLC and touch screen can be reset electrically with 360 degree adjustment （no matter running or stopping）.

v        Controlling panel with 10.4 inches touching screen。

v        Balance adjustment can enhance the stability of the machine.

v        Pre-pressing wheel: After pre-pressing, cardboard can’t be damage.

v        Upper creasing wheel is covered with polyurethane rubber to prevent from damaging cardboard.

v        Thickness of the alloy slotting knife is 7mm.The knife with high precision is heated and grinded, and has sharp and blade.

模切部：

v        滚轴采用优质钢材，经研磨，镀硬铬。

v        速度补差装置，控制胶滚筒的表面速度，不论胶垫的直径如何变化，胶垫表面的速度*由刀模操纵，使模切的纸箱与刀模形状**。

v        胶垫辊机械式凸轮横向移动40mm游动装置。

v        模切相位采用PLC、触摸屏控制，电动数字式360度调整（运转、停止均可调整）。

v        配备胶垫修复系统，延长胶垫使用寿命，降低成本。

v        相位调整机构，行星轮式构造。

v        传动齿轮采用20CrMnTi。

Die Cutting Unit:

v        Rollers: Adopting high quality steel pipe and the pipe is grinded and plated hard chromium.

v        Adopting synchronizer to make the speed of die cutting roller and rubber pad roller is consistent so as to improve the precision of die cutting, no matter rubber pad wears. So this can ensure the shape of the cutting cardboard are the same as the die-cutting pattern.

v        Anvil roller （up roller）: Mechanical helix fluted-roll type, transverse movement 40mm.

v        Die cutting phase is controlled by PLC and touch screen can be reset electrically with 360 degree adjustment （no matter running or stopping）.

v        Fitting with the rubber repair system to prolong service life and lower the cost.

v        Regulate die cutting phase position with planetary gear structure.

v        Transmission gears are made of 20CrMnTi.

技术参数specifications：