深圳电解电容有限公司
◆◆◆◆◆电容需求接入:
◆ 36933700
36944446
33536680
◆
◆www.ydkcn.com
www.yadikey.com
www.u-con.net
http://ydkcn.jimdo.com
www.ydk-u-con-rubycon-chemi-con-nichicon-cde-bhc-elna-epcos-hitachi.com
◆：631501521
 ◆www.ydkcn.com◆www.yadikey.com◆www.u-con.net◆http://ydkcn.jimdo.com
◆www.ydk-u-con-rubycon-chemi-con-nichicon-cde-bhc-elna-epcos-hitachi.com
海外主要客户：ABB、日本力士集团=http://www.luxman.co.jp
大陆：三星中国、正泰电器、山东大学、天津大学下属合作单位。
以下螺栓电解电容，全新品，综下所述，欢迎参观工厂，欢迎看厂。

产品系列（Products Series）：    CD289铝电解电容     
产品规格（Products specification）：400V1000uF  -20~+20%
产品壳号（Products Case）：  35*60
85℃（大陆标准2000H）产品  实测zui大值4000H    
（保证值约40000H）  40℃温度下保证值：10年
（实测zui大89200H） 40℃寿命16年=16*365*24H
● 铝电解电容器使用说明 Notes for use of aluminum electronic capacitors
1.在电器回路不清楚或不明确线路之极性时，则建议使用无极性电解电容器。 1.lf circuit polarities are uncertain, Non-polar capacitors are recommended.
2.无极性（或二极性）电解电容器，可使用在极性转换的回路或直流回路上。 2.Non-polar （or Bi-polar） capacitors can be used in polaritiy- changing circuits or DC circuits.
3.单极性电解电容器只能使用在直流电路上，其极性必需标明在适当之位置或在导针/端子之旁边。 3.Polarized capacitors can be used in DC circuits only. Its polarity must be marked on the proper side of wire/terminal.
4.电解电容器应储存于低温及干燥之处所。 4.Capacitors should be stored at a place of cool and dry.
5.电解电容器不可使用在周围温度超过标示之使用温度范围。 5.Capacitors cannot be used in a place of ambient temperature exceeding its marked temperature.
6.电解电容器不适用于超过可容许纹波电流范围之回路之上，假如有需要耐高温纹波电流之电解电容器，请与我们洽商详情 6.Capacitors cannot be used in a circuit where ripple current exceeds its allowed range. Please contact us if you have requirement for high temperature and ripple current capacitors
7.电解电容器经*储存，如果漏电流超出规格值，使用前应以额定电压重新再老化30~60分钟。 7.lf capacitors have been stored for a long time and its leakage current exceeds the specified value, please recharge for 30 to 60 minutes with rated voltage before using.
8.电解电容器一般品不适用于骤然间之充放电，如需使用在快速充放电的场合，请与我们洽商。 8.Capacitors cannot be used in a circuit charge or discharge, lf use in a circuit of sudden charge is required, please contact us.
9.使用于电解电容器之工作电压，
不得超过额定电压。 9.Application of working voltage to capacitors should not exceed its rated voltage.
10.为了保护电解电容器之内部结构，其导针或端子不容许过分之拉力或承受的拉力，请参考JIS C 5102。 10.ln order to protect the internal structure, ydcon capacitors cannot be applied with over pull-force. Please refer to JIS C 5102.
11.电烙铁应与电容器塑胶套管保持适当距离，以防止过热造成塑胶套管破裂。 11. Soldering iron should be kept in a suitable distance from vinyl sleeve of capacitor in order to avoid sleeve crack.
12.电解电容器经波峰焊锡之程序，其焊锡槽之温度不容许超过260℃±10℃，时间10秒钟。 12.For peak soldering , the solder temperature should not exceed 260℃±10℃ for 10 seconds.
13.为了保护塑胶套管、印刷标示以及封口材料不被破坏，电解电容器不得以滷化化学药品或类似溶剂，作为电解电容器洗涤之用，如三氯乙烯、二甲苯类或酮类等。 13.In order to protect PVC sleeve, printed marks and sealing material, capacitors can not be cleaned with  halogenated chemicals or similar solvent such as trichlorethylene, Xylene or Acetone, etc.
14.本公司一般规格之电解电容器，其品质依照JIS C 5141 标准。 14.Quality of our capacitors is in accordance with JIS C 5141.
15.本公司之信赖性试验方法，JIS C 5102 标准。 15.Reliability test methods for our capacitors are
in accordance with JIS C 5102.
16.本公司在生产过程中不使用破坏臭氧层之药品。 16.None of Ozone Depleting Chemicals （ODC） is used in any manufacturing processes of yadacon Company.