品牌
其他厂商性质
所在地
|
| Technology | ||
| Standards | IEEE 802.3, IEEE 802.3u, IEEE802.3x | |
| Processing Type | Store & forward wire speed switching | |
| MAC Addresses | 1024 | |
| Memory Bandwidth | 3.2 Gbps | |
| Flow Control | IEEE 802.3x flow control, back pressure flow control | |
| Redundant strategy | STP, Ring (ICP DAS) | |
| Protocol | Modbus/RTU, Modbus/TCP, OPC, STP, Cyber Ring | |
| Interface | ||
| RJ-45 Ports | 3 x 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection | |
| Fiber Optics Port | 2 x 100 Base-FX | |
| LED Indicators | 10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port) | |
| Ethernet Isolation | 1500 Vrms 1 minute | |
| Frame Ground for EMS Protection | Yes | |
| Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm | |
| Multi Mode | Multi Mode Fiber Cables | 50/125, 62.5/125 or 100/140 μm |
| Distance | 2 km, (62.5/125 μm recommended) for full duplex | |
| Wavelength | 1300 or 1310 nm | |
| Min. TX Output | -20 dBm | |
| Max. TX Output | -14 dBm | |
| Max. RX Sensitivity | -32 dBm | |
| Max. RX Overload | -8 dBm | |
| Budget | 12 dBm | |
| Single Mode (Standard) | Single-mode fiber cables | 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| Distance | 30 km, (9/125 μm recommended) for full duplex | |
| Wavelength | 1300 or 1310nm | |
| Min. TX Output | -15 dBm | |
| Max. TX Output | -8 dBm | |
| Max. RX Sensitivity | -34 dBm | |
| Max. RX Overload | -5 dBm | |
| Budget | 19 dBm | |
| Single Mode (60T) | Single-mode fiber cables | 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| Distance | 60 km, (9/125 μm recommended) for full duplex | |
| Wavelength | 1300 or 1310nm | |
| Min. TX Output | -5 dBm | |
| Max. TX Output | 0 dBm | |
| Max. RX Sensitivity | -35 dBm | |
| Max. RX Overload | -5 dBm | |
| Budget | 30dBm | |
| Ethernet Cables | 10 Base-T (Cat.3, 4, 5 UTP cable; 100m Max.) 100 Base-TX (Cat.5 UTP cable; 100m Max.) | |
| Management interface | Console, DIP/Rotary Switch | |
| Alarm output | Relay | |
| Power Input | ||
| Input Voltage Range | +12 ~ +48 VDC (Non-Isolation, redundant input) | |
| Alarm Contact | One relay output with current carrying capacity of 2 A @ 30 VDC | |
| Power Consumption | 0.3 A @ 24 VDC, +/-5% arrowed | |
| Protection | Power reverse polarity protection | |
| Frame Ground for EMS Protection | Yes | |
| Connection | 7-Pin Removable Terminal Block | |
| Mechanical | ||
| Casing | Plastic | |
| Environmental Rating | UL 94V-0 | |
| Dimensions (W x L x H) | 64 mm x 98 mm x 110 mm | |
| Installation | DIN-Rail Mounting | |
| Environmental | ||
| Operating Temperature | -30 °C~ +75°C | |
| Storage Temperature | -20 °C ~ + 85 °C | |
| Ambient Relative Humidity | 10 ~ 90% RH, non-condensing | |
| Accessories | ||
| Include Cable | CA-090510 x 1 | |
| RS-405AFT-T | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, ST Type (+12 ~ +48 VDC, non-isolation) |
| CA-090510 | 9-pin Female D-sub & RJ-45 cable, 1M Cable |
| GPSU06U-6 | 24 V/0.25A, 6 W Power Supply |
| DIN-KA52F | 24 V/1.04, 25 W Power Supply with DIN-Rail Mounting |
