品牌
经销商厂商性质
上海市所在地
SMC油水分离器安装件型号,AFD2000-02D新款为AFD20-02C
面议VPA系列日本SMC直接配管型气控阀
面议日本SMC气液回路控制用2通阀
面议日本SMC真空吸盘ZPT16BNK10-B5-A10
面议直接配管型SMC减压阀接管口径VEX1300-04
面议HRZ001-L-D日本SMC水冷式冷水机特点
面议VNC系列冷却液用阀式日本SMC外部先导气控阀
面议HRS100/150系列SMC深冷器HRS100-AF-40
面议AW40-06DG-ASMC过滤减压阀AW30-03BDG-A
面议保养IDFA75E-23-G日本SMC干燥机的方法
面议VEX1533-04-GN日本SMC精密减压阀灵敏度设定
面议日本SMC气缸控制器LECP6P3-LEY32DC-200
面议日本SMC电磁阀接线图
容易地添加或减少
阀站的数量。
方便阀门维护
可安装带
一个螺丝。
使用卡带式的阀门和歧管,使
很容易地增加或减少站的数量
在DIN导轨上。该插件类型包括两个额外
阀站连接器。这种设计使得重装
歧管扩张过程中不必要的。
日本SMC电磁阀接线图
Easy to add or decrease
the number of valve stations.
Easy valve maintenance
Mountable with
one screw.
The use of cassette style valves and manifolds makes
it easy to increase or decrease the number of stations
on a DIN rail. The plug-in type includes two extra
valve station connectors. This design makes rewiring
unnecessary during manifold expansion.
注1)使用干燥的空气,以防止冷凝在低温条件下工作。
注2)耐振动:不发生故障,在45和2000赫兹之间有一个扫描测试。测试
在两个激励和去激励状态在轴向方向上执行
和在垂直于主阀和电枢。 (值在初始
期)
耐冲击性:当它与在轴向一个下跌试验机测试未发生故障
方向,并在合适的角度,以在这两个主阀和电枢
通电和断电状态每一次为每个条件。
注意仅3)金属密封型。
注4)快速响应,高压型的价值
Note 1) Use dry air to prevent condensation when operating at low temperatures.
Note 2) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000 Hz. Test
was performed at both energized and de-energized states in the axial direction
and at the right angles to the main valve and armature. (Values at the initial
period)
Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial
direction and at the right angles to the main valve and armature in both
energized and deenergized states every once for each condition.
Note 3) Metal seal type only.
Note 4) Value for quick response, high pressure type
接线图