品牌
生产厂家厂商性质
上海市所在地
一、概述Outline
QJ(D/S)RF型精小型气动衬氟O型切断球阀是由气动活塞式执行机构和衬氟O型球阀组成。阀芯采用衬氟圆柱形通孔球体和软密封阀座。
该产品以压缩空气为动力源,借助阀门定位器(或电磁阀)对阀门实现连续调节(或位式控制)。
该产品阀体内壁和金属阀内组件衬由耐腐蚀、抗老化的聚全氟乙丙烯(F46),因而具有耐腐蚀性能良好、抗老化性能高、寿命长、流阻小、流通能力大等优点,特别适用各行业对酸、碱等强腐蚀性介质场合。
QJ (D / S) RF-type fine cutting of small pneumatic fluorine O type ball valve is a pneumatic piston actuator and fluorine O type ball valve components. Spool using fluorine cylindrical hole sphere and soft seal seat.
The product is compressed air as power source, with the positioner (or solenoid valve) to achieve a continuous adjustment of the valve (or bit control).
The product body wall and the metal valve components from the corrosion-resistant lining, anti-aging poly FEP (F46), which has good corrosion resistance, aging resistance, long life, small flow resistance, flow capacity advantages, especially for the industry to acid, alkali and other strong corrosive media applications.
二、规格技术参数及性能指标Technical parameters and performance specifications
1.规格技术参数
公称通径mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | ||||||||
额定流量系数Kv | 17 | 33 | 62 | 95 | 146 | 232 | 350 | 439 | 810 | 1205 | 1812 | 3014 | ||||||||
公称压力Mpa | 1.0 | |||||||||||||||||||
执行机构 Executive body | 型号 Model | AGT63 | AGT63 | AGT92 | AGT118 | AGT127 | AGT143 | AGT190 | AGT210 | |||||||||||
输出转矩N.m | 29 | 70 | 97 | 210 | 275 | 439 | 986 | 1165 | ||||||||||||
气源压力Mpa | 0.4~0.6Mmpa | |||||||||||||||||||
行程 Travel | 90° | |||||||||||||||||||
固有流量特性 Inherent flow characteristic | 快开特性Quick-opening feature | |||||||||||||||||||
介质温度temperature | - 20~ +180℃ | |||||||||||||||||||
阀体材料Body Material | ZG230-450内衬F46或不锈钢内衬 F46ZG230-450 stainless steel inner lining F46 or F46 | |||||||||||||||||||
法兰标准 Flange Standard | JB/T 79.1-94、JB78 | |||||||||||||||||||
允许标差Mpa | 等于公称压力Equal to the nominal pressure |
2.性能指标Performance indicators
项目Project | 带定位器指标值Index value with locator |
基本误差±1.0% Basic error of ± 1.0% | ≤±3 |
回差1.0% 1.0% hysteresis | ≤±5 |
死区1.0% 1.0% dead | 2.5 |
额定转角偏差% Rated angle deviation% | +5° |
允许泄露量L/h Allow disclosure of the amount of L / h | GB/T4213-92 VI级 |
3.执行机构转扭及动作时间Twist and turn actuators operating time
执行机构型号AGT | 63×90 | 75×90 | 83×90 | 92×90 | 110×90 | 118×90 | 127×90 | 160×90 | 210×90 | 254×90 | 255×90 | |
扭矩N.m | 400Kpa | 23.2 | 40.0 | 56.0 | 77.6 | 112.8 | 168.0 | 220.0 | 440.0 | 948.0 | 1740.0 | 2172.0 |
500Kpa | 29.0 | 50.0 | 70.0 | 97.0 | 141.0 | 210.0 | 275.0 | 550.0 | 1185.0 | 2715.5 | 2715.0 | |
动作时间(S) | 0.241 | 0.333 | 0.429 | 0.444 | 0.461 | 0.60 | 0.857 | 1.62 | 3.33 | 6.00 | 7.50 |
三、可选附件Optional accessories
调节型:电-气阀门定位器(或电气转换器),空气过滤减压器,手轮机构等。
切断型:二位五通电磁阀(弹簧复位球阀配二位三通),阀门开关(或接近开关),空气过滤减压器,手轮机构等。
Adjustment type: electric - gas valve locator (or electrical converter), air filter regulator, hand wheel institutions.
Cut-off: two five-way solenoid valve (spring return valve with two links), the valve switch (or close to the switch), air filter regulator, hand wheel institutions.
四、主要零件材料Main parts
名称Name | 材料Material | 名称Name | 材料Material |
左右阀体、带杆球芯 Around the body, shot the ball with a core | HT200、ZG230-450 | 阀座Seat | F50 |
五、外形尺寸Dimensions
单位:mm
公称通径 | L | D | D1 | D2 | b | Z-φd | H | H1 | A | 重量Kg |
15 | 130 | 95 | 65 | 45 | 14 | 4-φ14 | 150 |
54 |
140 | 7 |
20 | 140 | 105 | 75 | 55 | 16 | 4-φ14 | 150 | 7.8 | ||
25 | 150 | 115 | 85 | 65 | 16 | 4-φ14 | 174 | 11 | ||
32 | 165 | 135 | 100 | 78 | 18 | 4-φ18 | 174 |
80 |
284 | 15 |
40 | 180 | 145 | 110 | 85 | 18 | 4-φ18 | 208 | 22 | ||
50 | 200 | 160 | 125 | 100 | 20 | 4-φ18 | 237 | 31 | ||
65 | 222 | 180 | 145 | 120 | 20 | 4-φ18 | 285 | 36 | ||
80 | 250 | 195 | 160 | 135 | 22 | 4-φ18 | 302 | 51 | ||
100 | 280 | 215 | 180 | 155 | 22 | 8-φ18 | 324 |
125 |
452 | 84 |
125 | 320 | 245 | 210 | 185 | 24 | 8-φ18 | 450 | 110 | ||
150 | 360 | 280 | 240 | 210 | 24 | 8-φ23 | 480 | 150 | ||
200 | 400 | 335 | 295 | 265 | 26 | 8-φ23 | 526 | 230 |