小型喷雾干燥机技术参数:
1、实验室小型喷雾干燥机全自动控制与手动控制双重控制模式，整个实验过程彩色触摸屏动态显示（动画）
2、进风温度控制：30℃～300℃
3、出风温度控制：30℃～140℃
4、蒸发水量：1500mL/H～2000ml/h
5、zui大进料量：蠕动泵可调zui大为2000ml/h
6、zui小进料量：50mL
7、可升级成双级分离收集系统
8、实时调控PID恒温控制技术，加热控温精度：±1℃
9、干燥时间：1.0～1.5S
10、具有关机保护功能：关机时只需按停止键，机器除风机外立即停止运行，保证设备不会因为误操作（强行关风机）而导致加热部分烧坏。
11、彩色LCD触摸屏参数显示：进风口温度/出风口温度/蠕动泵转速/风量/通针频率
12、喷嘴口径：0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm可选，并可根据要求定制
13、设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整
14、喷雾干燥机整机全不锈钢制作,二流体喷雾的雾化结构，喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造
15、内置进口全无油空压机，喷粉的颗径呈正态分布，流动性好，而且噪音非常低，符合实验室噪音标准；
16、整机功率：3KW/220V
17、塔壁吹扫装置，物料得率更高
18、喷雾头冷却装置（可选）
19、可直接升级成应用于有机溶剂物料干燥的氮气循环系统
20、设备尺寸：1200mm(高）*650mm（长）*500mm（宽）

Mini spray dryer technology parameters:
1, laboratory spray dryer automatic control and manual control of the dual control mode, the whole experiment process color touch screen dynamic display (animation)
2, air inlet temperature control: 30 to 300 DEG C
3, out of the wind temperature control: 30 to 140 DEG C
4, water evaporation: 1500mL/H ~ 2000ml/h
5, the maximum feed rate: adjustable peristaltic pump maximum 2000ml/h
6, the minimum feed rate: 50mL
7, can be upgraded into double stage separation collection system
8, real time control of PID temperature control technology, heating temperature control precision: - 1 DEG C
9, the drying time: 1 ~ 1.5S
10, with the shutdown protection function: shutdown just press the stop button, the machine in addition to the wind outside the machine immediay stop operation, ensure the equipment will not be because of misoperation (forcibly closed fan) and lead to burn out heating part.
11, color LCD touch screen display of parameters: the air inlet / outlet temperature temperature / peristaltic pump speed / wind / needle frequency
12 and the nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm is optional, and can be customized according to customer requirements
13, a nozzle cleaner (needle), is blocked at the nozzle, will be automatically cleared, needle frequency can be adjusted automatically
14, spray dryer machine all stainless steel atomizing structure of two fluid spray, spraying, drying and collecting system made of transparent high heat-resistant borosilicate glass material
Built in 15, imports of oil free air compressor, powder particle size showed normal distribution, good fluidity, and the noise is very low, consistent with national standards laboratory noise;
16, the complete machine power: 3KW/220V
17, the tower wall cleaning device, the material yield higher
18, the spray head cooling device (optional)
19, can be directly upgraded to be used in organic solvent material dry nitrogen cycle system
20, the size of the equipment: 1200mm (high) *650mm (L) *500mm (W)

产品说明:
Jipad-2000ML实验室主要适用于高校、研究所和食品医药化工企业实验室生产微量颗粒粉末，对所有溶液如乳浊液、悬浮液具有广谱适用性,适用于对热敏感性物的干燥如生物制品、生物农药、酶制剂等，因所喷出的物料只是在喷成雾状大小颗粒时才受到高温，故只是瞬间受热，能保持这些活性材料在干燥后仍维持其活性成份不受破坏。

Mini spray dryer product description:
Jipad-2000ML laboratory spray dryer is mainly suitable for colleges and universities, research institutes and pharmaceutical and chemical enterprises producing food laboratory trace particle powder for all solution, emulsion, suspension has broad applicability, suitable for heat sensitive materials dry as biological products, biological pesticide, enzyme preparations, high temperature is only because of the sprayed material just in a fog shape size particles in the spray, so just an instant heating, can keep the active material is not damaged after drying and still maintain its active ingredients.

产品特征：
1、采用彩色大触摸屏操作，全自动控制和手动控制相结合，国内*：
2、全自动控制：一键式开机，设定喷雾工艺参数后，温度到达预定温度，蠕动泵自行启动，触摸屏上显示运行动画，运行流程清晰显示；关机时只需按停止键，机器自动安全关机。
3、手动控制：如需在实验过程对工艺参数进行调整，可方便切换至手动状态，整个实验过程彩色触摸屏动态显示（动画）。
4、关机保护功能：关机时只需按停止键，机器除风机外立即停止运行，保证设备不会因为误操作（强行关风机）而导致加热部分烧坏。
5、喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造，使得喷雾干燥过程在无污染及zui稳定的环境下进行，且使整个喷雾干燥实验进程可直接观察，为科研人员掌控实验进程及实验结果提供了*的便利,并能及时发现解决问题。所有玻璃元件易拆卸，易清洗。
6、内置进口全无油空压机，喷粉的颗径呈正态分布，流动性非常好，而且噪音非常低，小于60db，符合实验室噪音标准；
7、二流体喷雾的雾化结构，整机采用优质不锈钢材料精密制造，设计紧凑，无需附属设备，方便使用，历久如新。
8、为了满足用户在实验范围调节各项参数的要求，在干燥温度控制的设计上采用实时调控PID恒温控制技术，使全温区控温准确，加热控温精度±1℃。
9、为了保持样品的纯净，配备了进风口过滤器。
10、进料量可通过进料蠕动泵调节，zui小样品量可达50ml。磁力搅拌器可选
11、干燥后的成品干粉，其颗粒度较均匀，95%以上的干粉在同一颗粒度范围。
12、实验室针对黏性物料，设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整；
13、创新的塔壁吹扫装置，物料回收率更高。

Mini spray dryer product features:
1, using large color touch screen operation, automatic control and manual control of a combination, the only domestic:
2, full automatic control: one key start, set the spray process parameters, temperature reaches the preset temperature, the peristaltic pump to start, to touch the running animation display screen, the operation process clearly display; shutdown just press the stop button, the machine automatically safe shutdown.
3, the manual control: such as the need to adjust the process parameters in the experimental process, can easily switch to manual state, the whole experiment process color touch screen dynamic display (animation).
4, shutdown protection function: shutdown just press the stop button, the machine in addition to the wind outside the machine immediay stop operation, ensure the equipment will not be because of misoperation (forcibly shut the fan) and lead to burn out heating part.
5, spraying, drying and collecting system made of transparent high heat-resistant borosilicate glass material, makes the spray drying process in no pollution and the most stable environment, and make the whole spray drying experiment process can be directly observed, the experimental process and the experimental results have provided great convenience for scientific research personnel control, and timely find and solve problems. All glass element of easy disassembly, easy cleaning.
Built in 6, imports of oil free air compressor, powder particle size showed normal distribution, liquidity is very good, and the noise is very low, less than 60dB, consistent with the noise standard of national laboratory;
Atomizing structure 7, two fluid spray, the machine adopts precision manufacturing, high-quality stainless steel materials has the advantages of compact design, no need of auxiliary equipment, easy to use, as good as new.
8, in order to satisfy the user adjust the parameters in the experimental range requirements, using the real-time regulation of PID temperature control technology in the design of drying temperature control, make full temperature range accurate temperature control, heating temperature control precision is + - 1 DEG C.
9, in order to maintain the purity of the sample, is equipped with air inlet filter.
10, the feed amount can be through the feeding peristaltic pump regulator, minimal sample volume up to 50ml. Optional magnetic stirrer
Finished powder 11, after drying, the granularity is more uniform and more than 95% of the dry powder in the same particle size range.
12, small laboratory spray dryer for viscous material, is provided with a nozzle cleaner (needle), is blocked at the nozzle, will be automatically cleared, needle frequency can be adjusted automatically;
The tower wall 13, innovation of the blowing device, the material recovery rate is higher.