品牌
代理商厂商性质
深圳市所在地
程控耐压绝缘测试仪7122|深圳交直流耐压绝缘测试仪
| 机型 | 功能说明 | ||||
| 7110 | 交流耐压测试器(AC Withstand Voltage Tester) | ||||
| 7120 | 交直流耐压测试器(AC/DC Withstand Voltage Tester) | ||||
| 7112 | 交流耐压/绝缘测试器(AC Withstand Voltage/Insulation Tester) | ||||
| 7122 | 交直流耐压/绝缘测试器(AC/DC Withstand Voltage/Insulation Tester) | ||||
| 交流耐压测试 | 额定输出：5KV | ||||
| | 范围 | 解析度 | 精密度 | ||
| 输出电压KVAC | 0-5．00 | 0.01 | ±(2% of Setting+5V) | ||
| 输出频率 | 50/60Hz可选择 | | ±100ppm | ||
| 输出波形 | 正弦波THP<2%波峰因素 | | | ||
| 上限设定mA | 0.10-12.00 | 0.01 | ±(2% of Setting+2counts) | ||
| 下限设定mA | 0.00-12.00 | 0.01 | ±(2% of Setting+2counts) | ||
| 绝缘电阻测试 | 1000V/1000M | | | ||
| 输出电压设定 | 0.01-1.00KV dc | 0.01 | ±(2% of Setting+2V) | ||
| 电压显示 | 0.01-1.00KV dc | 0.01 | ±(2% of Setting+1counts) | ||
| 高阻显示 | 1-1000MΩ | | ±(3% of Setting+2counts)在电压>500Vdc | ||
| | | | ±(7% of Setting+2counts)在电压>500Vdc | ||
| 上限设定 | 1-1000MΩ | 1MΩ/Step | ±(3% of Setting+2counts)在电压>500Vdc | ||
| 下限设定 | 1-1000MΩ | 1MΩ/Step | ±(7% of Setting+2counts)在电压>500Vdc | ||
| 直流耐压测试 | 额定输出:6KVA dc/5mA | ||||
| 输出电压KVdc | 0-6.00 | 0.01 | ±(2% of Setting+5V) | ||
| 连波 | <5%d 6KVAdc/5mA电阻负载下测 | ||||
| 上限设定mA | 0.02-5.00 | 0.01 | ±(2% of Setting+2counts) | ||
| 下限设定mA | 0.00-5.00 | 0.01 | ±(2% of Setting+2counts) | ||
| 电压稳压率 | ±(1%设定值+5V)空载至满载 | ||||
| 缓升时间sec | 0.1-999.9 | 0.1 | ±(0.1% of +0.05Sec) | ||
| 测试时间sec | 0.02-999.9 | 0.1 | ±(0.1% of +0.05Sec) | ||
| 电压表(ac/dc | 0.00-6.00KV | 0.01 | ±(2% of Setting+1counts) | ||
| 电流表(ac/dc)mA | AC:0.00-12.00/DC0.02-5.00 | 0.01 | ±(2% of Setting+1counts) | ||
| 电弧侦测 | 0-9段：0=OFF | ||||
| 遥控装置 | 输入：Test.Reset 输出：Pass, Fail .Test-in-Process | ||||
| 测试失败警报 | 蜂鸣器，液晶显示“FALL”指示灯 | ||||
| 记忆组 | 5组记忆 | ||||
| 键盘安全锁定 | 可选择“锁定”或“不锁定”两种模式 | ||||
| 液晶显示器 | 16*2点矩阵背光 | ||||
| 较正方式 | 前面板软体校正 | ||||
| 输入特性 | 单相47-63Hz 115/230Vac±15%，可选择，3A保险 | ||||
| 工作环境 | 0-40℃/0-80%RH | ||||
| 尺寸 | 280(W)*100(H)*380(D) | ||||
| 重量 | 9KG | ||||
