耐磨热电偶
耐磨热电偶
耐磨热电偶
耐磨热电偶
耐磨热电偶

WRN2/WRE2-430耐磨热电偶

参考价: 面议

具体成交价以合同协议为准
2022-05-19 22:30:02
27
产品属性
关闭
江苏森恩自动化科技有限公司

江苏森恩自动化科技有限公司

初级会员1
收藏

组合推荐相似产品

产品简介

耐磨热电偶作为测量温度的传感器,通常和显示仪表、记录仪表和电子调节器配套使用。它可以直接测量各种生产过程中从0C~1800℃范围内的液体、蒸汽和气体介质以及固体的表面温度。

详细介绍

 一、产品简介   Product introduction

       WR系列工业用耐磨热电偶作为测量温度的传感器,通常和显示仪表、记录仪表和电子调节器配套使用。它可以直接测量各种生产过程中从0C~1800℃范围内的液体、蒸汽和气体介质以及固体的表面温度。

       WR series of industrial assembly type thermocouple as the measurement of the temperature sensor, Usually and display instrument, Recording instrument and electronic supporting the use of regulator. It can directly measure the various production process from 0C~1800range Liquid, steam and gas and solid medium surface temperature.

 

       根据规定,我公司生产符合IEC标准分度号的铂铑30-铂铑6、铂铑10-铂、镍铬-镍硅、镍铬-铜镍、铜-铜镍、铁-铜镍等形式。

       According to the provisions of the state, Our company in line with the IEC international standard index number Platinum and rhodium30-Platinum and rhodium6Platinum and rhodium10- PlatinumNickel chromium - nickel silicon, Nickel - chromium, Copper copper - nickel, Iron copper - Nickel Form.

 

二、工作原理   Working principle

       耐磨热电偶的工作原理是:两种不同成分的导体两端经焊接、形式回路,直接测温端叫测量端,接线端子端叫参比端。当测量端和参比端存在温差时,就会在回路时产生热电流,接上显示仪表,仪表上就指示出热电偶所产生的热电动势的对应温度值。

       Thermocouple Working principle. Two different components of the conductor ends by welding, form loop, Direct temperature measuring end called the measuring end, The terminal end is called the reference terminal. When the measuring end and the reference end Temperature difference, Will be in the loop Thermal current, Connected to display instrument, The instrument will indicate the thermocouple Thermal electromotive force Corresponding temperature.

 

      的热电动势将随着测量端温度升高而增长,热电动势的大小只和热电偶导体材质以及两端温差有关,和热电极的长度、直径无关。

       The thermocouple electromotive force with The measuring end temperature and growth, The size of thermal emf Only and thermocouple conductor material And the temperature difference between the two ends of the relevant, And the power electrode length, diameter.

 

       装配式热电偶主要由接线盒、保护管、绝缘套管、接线端子、热电极组成基本结构,并配以各种安装固定装置组成(见下图)。

       Thermocouple assembly is mainly composed of a junction box, protection tube, insulating sleeve, terminals, power is the basic structure, And with a variety of mounting and fixing device (see below).

 WRN-1

WRN-3
WRN-4

WRN-6


WRN-9


WRN-12
WRN-13
WRN-14


WRN-17
WRN-18
WRN-19


WRN-22

上一篇:干热岩的开发利用 下一篇:SF6分解物测试仪生产厂家拓普电气解读SF6气体毒性的来源
提示

请选择您要拨打的电话:

26385 [{"ID":"754243","CompanyID":"58821","Title":"干热岩的开发利用","Picture":"mt0002/3/20190216/636859062397875154374.png","PictureDomain":"img48","UpdateTime":"2024/11/9 7:26:13","CreateTime":"2024/11/9 7:26:13","ClassName":"技术交流","rn":"3"},{"ID":"753470","CompanyID":"58918","Title":"SF6分解物测试仪生产厂家拓普电气解读SF6气体毒性的来源","Picture":"mt0002/3/20181025/636760621337335958704.jpg","PictureDomain":"img49","UpdateTime":"2024/11/4 7:59:11","CreateTime":"2024/11/4 7:59:11","ClassName":"技术交流","rn":"4"}]