Tronex^® Class T cutters are made from precision machined cutter blanks in which solid tungsten carbide material has been silver brazed in the cutter jaw. Diamond grinding then forms the head shape and sharpens the cutting edges. This tool design, with its dual material construction, combines the high yield strength of carbon steel with the intense localized hardness of tungsten carbide. Cutting edges of CLASS T cutters have a hardness of 79 to 81 HRC. CLASS T cutters can cut thicker hard wire than CLASS W solid tungsten/cobalt alloy steel cutters. Handles and jaws of CLASS T cutters are tougher than those of solid tungsten/cobalt alloy steel. The oval head Class T cutters will cut Tungsten wire up to 0.020" diameter.

*Steel wire diameter cutting capacity

Tronex®C级刀具由精密加工的刀具坯料制成，其中实心碳化钨材料在刀具钳口中进行了银色钎焊。 然后，金刚石研磨形成头部形状并锐化切削刃。 这种工具设计采用双重材料结构，将碳钢的高屈服强度与碳化钨的强烈局部硬度相结合。 CLASS T刀具的切削刃的硬度为79至81 HRC。 CLASS T切割机可以切割比CLASS W实心钨/钴合金钢切割机更厚的硬线。 CLASS T刀具的手柄和钳口比实心钨/钴合金钢的手柄和钳口更坚固。 椭圆头T级切割机将切割直径为0.020“的钨丝。

*钢丝直径切割能力

Prod #

Description

Unit

7232

Taper, Standard Handle, Flush Cutter / 0.20mm-0.51mm （.008"-.020"）*

each

Oval Head, Standard Handle CLASS T Cutters