品牌
代理商厂商性质
北京市所在地
Thermo Scientific的戴安ACRS-ICE500阴离子化学再生抑制器是专为复杂或高离子强度的样品，包括食品和饮料产品，生物样品，发酵工艺，工业过程酒中有机酸和醇分析，以及处理废水。此抑制剂是非常适合的复杂或高离子强度的样品中有机酸和醇离子排阻层析。它提供了以下优点：
高容量和溶剂兼容性设计
优化为复杂或高离子强度的样品中的有机酸和醇分析
低检测限，高信噪比，和优异的基线稳定性
快速启动和平衡
Dionex ACRS-ICE 500 阴离子化学再生抑制器
订货信息：
| ACRS-ICE 500 (4 mm) Anion Chemically Regenerated Suppressor | 084714 |
| ACRS-ICE 500 (9 mm) Anion Chemically Regenerated Suppressor | 084715 |
The Thermo Scientific™ Dionex™ ACRS-ICE™ 500 Anion Chemically Regenerated Suppressor is designed for the analysis of organic acids and alcohols in complex or high-ionic-strength samples, including food and beverage products, biological samples, fermentation processes, industrial process liquors, and treated wastewaters. This suppressor is ideally suited to ion-exclusion chromatography of organic acids and alcohols in complex or high-ionic-strength samples. It provides the following advantages:
High-capacity and solvent compatible design
Optimized for organic acid and alcohol analysis in complex or high-ionic-strength samples
Low detection limits, high signal-to-noise ratio, and excellent baseline stability
Fast startup and equilibration
The Dionex ACRS-ICE 500 suppressor is used in chemical suppression mode with a tetrabutylammonium hydroxide (TBAOH) regenerant. Standard ion suppression converts analytes into their acid or base forms. The Dionex ACRS-ICE 500 suppressor increases analyte conductivity by forming the TBA salt of the weak acid analyte, which is more conductive than the partially ionized acid form of the analyte.
The Dionex ACRS-ICE 500 suppressor removes the hydronium ion and any counterions of the analytes from the eluent stream and replaces them with tetrabutylammonium ion. This removal greatly reduces background conductivity. In addition, this mechanism forces the ionization of weak acid analytes, increasing sensitivity.
| Anion Ion-Exclusion Chemically Regenerated Suppressor (ACRS-ICE 500) Specifications | |
|---|---|
| Physical Specifications | |
| Dimensions (l × w × d) | 14.0 × 4.5 × 4.8 cm (5.5 × 1.8 × 1.9 in.) |
| Weight | 370 g (0.82 lb) |
| Void Volume | <50 μL (4 mm); <50 μL (9 mm) |
| Chemical Specifications | |
| Temperature Range1 | 15–40° C |
| Recommended Backpressure | 40 psi |
| Maximum Eluent Flow Rate | 3 mL/min |
| Eluent Solvent Restrictions2 | 90% solvent compatible5 |
| Maximum Regenerant EWM3 Flow Rate | 10 mL/min |
| Modes of Operation Supported | Chemical, DCR mode |
1When installed outside the heated column enclosure, all suppressors can support applications up to 60 ?C.
2Solvents for anion eluents include methanol. Solvents for cation eluents include acetonitrile and dioxane.
3EWM = external water mode; for eluents containing > 40% solvent, use the chemical regeneration mode.
4Recycle recommended for aqueous applications without solvent.
5Do not use THF solvent in the eluent.
