目标U100是用于各种基于闪烁体的辐射测量应用的数字管基座。它在单检测器监控应用以及高度复杂的多参数设置中提供出色的性能。两个高精度310 MHz ADC以14位分辨率数字化阳极和倍增电极信号。

U100架构
*的设计允许数字信号处理精度和在传统系统中不可用的特征。因此，动态范围为1：1,000,000，例如100 eV至100 MeV，可通过单个检测器连接实现。外部触发的定时精度为皮秒范围。时间标记的事件通过千兆以太网连接以超过100万cps的吞吐量传输作为列表模式数据。

一个开创性的增益稳定工作没有LED或放射源。它补偿PMT温度影响以及高计数速率变化。

集成无需任何努力
板载双核ARM处理器运行内置的基于浏览器的MCA软件包。不需要外部驱动程序或其他软件包。任何通过以太网连接的浏览器应用程序就足够目标U100附带了一个HTTP REST接口，用于的集成到第三方应用软件和更大的多参数系统结构中。

 Web界面频谱
带有频谱页面的Web界面...
 Web界面高电压校准
...高压设置...
 
...定时校准和...
 Webinterface API文档
... API文档。

The Target U100 is the most advanced digital tube base for a variety of scintillator based radiation measurement applications. It provides outstanding performance in single detector monitoring applications as well as in highly sophisticated multi-parameter settings. Two high precision 310 MHz ADCs digitize both anode and dynode signals with 14 bit resolution.

The unique design allows for digital signal processing accuracy and features which have not been available in conventional systems. Thus a dynamic range of 1:1,000,000, e.g. 100 eV to 100 MeV, can be achieved with a single detector attached. The timing accuracy with external triggering is in the picosecond range. Time tagged events are transferred as list mode data over the Gigabit Ethernet connection at more than 1 million cps throughput.

A ground breaking patented gain stabilization works without LEDs or radioactive sources. It compensates for PMT temperature effects as well as high count rate shifts.专业销售德国 Target systemelectronic Target U100 手持放射性核素计量仪

Integration without any effort专业销售德国 Target systemelectronic Target U100 手持放射性核素计量仪

The onboard dual core ARM processor runs the built-in browser based MCA software package. No external drivers or other software packages are required. Any web browser application connected via Ethernet is sufficient. The Target U100 comes with a HTTP REST interface for state of the art integration into third party application software and larger multi-parameter system structures.计量仪

计量仪

计量仪