YTN系列耐震压力表-北京宏昌信科技有限公司手机版

详细介绍

YTN系列耐震压力表
YTN Series Shock Proof Pressure Meter

YTN系列耐震压力表
简介

耐震压力表内部充灌阻尼液和配套缓冲装置，具有良好的耐震性能，适用于被测介质的压力有强烈脉冲变化或压力冲击和在生产工艺中经常突然卸荷的场合，以及环境震动较大的场所。仪表能测气体、液体脉动压力的平均值，以克服介质强烈脉冲及环境震动对仪表带来的损害，确保读数的准确性。

Brief introduction:

Shock proof pressure meter is filled with damping liquid inside and assembled with buffering device, owning good performance of shock proof. This sort of meters is suitable for locations where the pressure of medium changes intensely and pressure shock exists, or pressure is released suddenly in the course of manufacturing, or working environment shock largely. The meter can measure fluctuating pressure average of gas and liquid mediums. Thus damage to meter induced by intensive fluctuation and environmental shock can be overcome smoothly and accuracy of reading is ensured.

构成示意图 Internal structure

主要技术参数

精确度：1.6级、2.5级
使用环境温度：5℃~55℃ 表壳内充甘油
-25℃~55℃ 表壳内充硅油
填充工作液：a：甘油；b：硅油；c：根据用户需求填充
外壳防护等级：IP65
抗工作环境振动：V.H.4

Principal technical parameters

Accuracy: 1.6, 2.5 grades
Temperature of applicable environment: 5℃~55℃ with glycerin filled inside the crust-25℃~55℃ with silicon petrol filled inside the crust
Filled operating liquid: a：glycerol; b：silicon petrol; c：Filled into
according to users requirement
Defend grade of crust: Ip65
Resistant operational environmental vibration: V.H.4

型号表示 Model designations

标记示例：YZTN-150ZT 产品电脑编码为0502064301

轴向前边耐震压力真空表，压力类别为压力真空（联程），安装形式为轴向前边。产品电脑编码详见《耐震压力系列仪表选型指南》。

Marking instance：YZTN-150ZT Production computer coding：0502064301

Axial front shock proof pressure vacuum meter pressure classis pressure vacuum（linkage）,mounted form production axial frontcomputer coding please see："Guide for type selection of shock proof series instruments and meters"

型号规格 Types and specifications

型号 Model	精确度 Accuracy
YTN-60	2.5	M14×1.5 1/4NPT;G1/4;	0~0.16;0~0.25;0~0.4;0~0.6;0~1;0~1.6; 0~2.5;0~4;0~6;0~10;0~16;0~25;0～40;0～60
YTN-60Z、ZT
YTN-100	1.6	M20×1.5 G1/2；1/2NPT	0~0.1;0~0.16;~0~0.25;0~0.4;0~0.6;0~1; 0~1.6;0~2.5;0~4;0~6;0~10;0~16;0~25; 0~40;0~60;0～100;0～250
YTN-100Z、ZT
YTN-150
YTN-150Z、ZT
YZTN-100、100ZT	1.6	M20×1.5 G1/2；1/2NPT	0~0.1;0~0.16;~0~0.25;0~0.4;0~0.6;0~1; 0~1.6;0~2.5;0~4;0~6;0~10;0~16;0~25; 0~40;0~60;0～100;0～250
TZTN-150、150ZT

注：接口尺寸可按用户要求制作。 Joint dimension can be customized

外形尺寸 External dimension

备注

当润滑脂甘油或硅油与氯、氮酸、氧化氯等强氧化剂混合时，会自发的发生化学反应，有燃烧或爆炸造成设备损坏、人员伤亡的可能。当压力表用于这些场合时均不能充润滑脂甘油或硅油，请与厂家，充填正确的内充油。

充填甘油的耐震表不能在低温条件下或地区使用。

- 0.1MPa量程范围内的真空压力表，精确度应低于1%（1.6或2.5）。

Remark

When lubricating grease glycerin or silicon oil mixed with strong oxidant, such as chlorine, nitrogen acid, and chlorine oxide, chemical reaction occurs spontaneously. In the course of reaction, combustion or explosion may cause equipment damaged or personnel injured. When pressure meters are used in such circumstances, lubricating grease glycerin or silica gel oil cannot be filled inside. Please contact with manufacturer for proper in-filled oil.

Shockproof pressure meter filled with glycerin inside cannot be used in low temperature condition or area.

If measure range of vacuum pressure meter is within -0.1MPa, the meters precision shall be lower than 1%

耐震压力系列仪表选型指南 Guide for type selection of shock proof series instruments and meters

订货须知 Ordering instructions

订货时须注明：产品电脑编码、型号、名称、精确度、测量范围。如特殊要求，请注明技术要求。

Ordering instructions: The product computer code ,types, names, accuracy grades, and measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.

产品简介

详细介绍