TOC总有机碳分析仪、测定仪采用世界的双波长紫外氧化技术，精度高、灵敏度高。高性能CPU，触摸屏智能化控制，具有离线分析和在线分析选配功能，配制外置式打印机，人性化的设计理念，更换UV灯和泵管不用拆开机箱，操作简单、方便，实现了分析仪器国产化。符合《中国药典》2010版附录 VIII R制药用水中总有机碳测定法，满足药典对仪器的要求：①TOC=TC-TIC，②系统适用性试验，③检测灵敏度（等于或小于0.05mg/L）。

TOC总有机碳分析仪、测定仪工作原理

样品中的有机物在紫外线及*广催化的作用下被氧化成二氧化碳，采用电导率检测技术测定二氧化碳，通过电导率传感器检测经氧化反应器氧化后的样品总碳与电导率传感器检测未经氧化反应器氧化的样品总无机碳之差，获得样品中总有机碳含量（TOC=TC-TIC）。

应用范围
1. 该仪器可用于检测制药工业中纯化水、注射用水和去离子水中有机碳的浓度；也可用于半导体行业中超纯水TOC的检测。

2. 在制药领域和生物化学领域清洁验证过程中，可用于验证清洁效果。
3. 该仪器具有在线检测功能，可以在线监测制药工业的制水系统、半导体工业 的超纯水制备系统和晶片工艺过程、电厂去离子水制备过程等。

性能规格:

测量范围：0.001mg/L～1.000 mg/L

精 度：±4% 测试范围

分 辨 率：0.001mg /L

分析时间：连续分析

响应时间：6分钟之内

检测极限：0.001mg /L

样品温度：1- 90℃

重复性误差：≤ 3%

电源要求/功能：220V

显 示 屏：彩色触摸屏

产品特点

1.仪器采用便携设计，使用轻便，方便移动至取样点。

2.采用嵌入式系统，触摸屏设计，纯中文操作方便简易。

3.针对制药用水（TOC含量在1000ppb以下）总有机碳含量的检测设计，进行检测。

4.配备大量的储存空间，能够存储大量的测试数据。

5.中文打印，输出测试参数、测试结果。

6.在使用、贮存和更换过程中不需要气体或试剂，无移动部件，减少维修和维护成本。

7.当测试样品浓度超过规定限度，仪器能够自动报警，并输出控制信号。

8.符合2010版《中国药典》规定的测试方案，可以提供 IQ/OQ/PQ 服务。

工作原理

本仪器采用紫外氧化的原理，将样品中的有机物氧化为二氧化碳，二氧化碳的测试采用的是直接电导率法，通过测试经过氧化反应的样品的总碳含量和未经过氧化反应的样品总无机碳的含量差值来测定总有机碳含量，即：总有机碳（TOC）=总碳（TC）-总无机碳（TIC）。

主要特征:

★高精度、高灵敏度，操作简单。

★人性化操作界面，有一键运行功能，自动管路清洗功能。

★高性能CPU，触摸屏设计，超大640*480点阵真彩显示器。

★不用拆开机箱更换UV灯和泵管。

★检测上限可设定，自动上限报警功能。

★具有RS232数据接口，历史数据可存储6个月。

★离线检测和在线检测可选配。

★具有微型打印机接口（打印机外置）。

主要特点

1.严格按照美国药典和欧洲药典等标准，符合中国药典标准

2.快速、高效、重复性好

3.的VITA技术

4.自动化和智能化

5.可配置总氮测定模块

6.可配置Swab-test清洁实验模块

7.颗粒物兼容性好

8.提供IQ、OQ、PQ

标签：

总有机碳分析仪  

TOC分析仪

TOC总有机碳分析仪

 总有机碳测定仪

The total organic carbon (TOC) analyzer adopts the world's leading dual wavelength ultraviolet oxidation technology, with high accuracy and high sensitivity.. High performance CPU, touch screen inligent control, with off-line analysis and on-line analysis of the matching function, preparation of external printer, humanized design concept, the replacement of UV lamp and tubing without open the chassis, simple operation, convenient and to realize localization of instrumental analysis. With the Chinese Pharmacopoeia 2010 Edition appendix VIII r pharmaceutical water total organic carbon determination method to meet the requirements of the instrument in Pharmacopoeia: TOC=TC-TIC, system suitability tests, the detection sensitivity (equal to or less than 0.05 mg / L).
Working principle
Samples of organic matter under ultraviolet light and TiO2 wide catalytic role was oxidized to carbon dioxide and the conductivity detection technique for the determination of carbon dioxide, by conductivity sensor for the detection of the oxidation reactor for oxidation of samples of total carbon and conductivity sensor detection not by the difference between the sample total inorganic carbon oxidation reactor for oxidation to obtain samples in total organic carbon content TOC=TC-TIC.
Application range
1 the instrument can be used to detect the concentration of organic carbon in the pharmaceutical industry, such as purified water, injection water and de ionized water.
The detection of TOC in the semiconductor industry.
2 in the field of pharmaceutical and biochemical cleaning validation process, can be used to verify the cleaning effect.
Can be in-line monitoring of pharmaceutical industry, water system, semiconductor industry of ultra pure water of preparation system and wafer processing, power plant deionized water preparation process such as the 3. The instrument has the function of on-line detection.
Performance specification:
Range: 0.001mg/L ~ 1 mg/L
Accuracy: 4% test range
Differentiation rate: /L 0.001mg
Analysis time: continuous analysis
Response time: within 6 minutes
Detection limit: /L 0.001mg
Sample temperature: 1- 90
Repeatability error: less than 3%
Power requirements / features: 220V
Color touch screen display screen
Product features
1 the instrument adopts portable design, portable and easy to move to sample point..
2 the use of embedded systems, touch screen design, pure Chinese easy to operate.
3 the detection and design of total organic carbon content of pharmaceutical water (TOC content in 1000ppb) was detected..
4 with plenty of storage space, can store a lot of test data.
5 Chinese print, output test parameters, test results.
6 in the use, storage and replacement process do not need gas or reagent, no components, reduce maintenance and maintenance costs.
7 when the concentration of the test sample exceeds the limit, the instrument can automatically alarm and output the control signal.
8 in line with the national version 2010 of the Chinese Pharmacopoeia provides a test program, you can provide IQ/OQ/PQ services.
Working principle
The instrument uses the principle of UV oxidation, oxidation of organic matter in the samples for carbon dioxide, carbon dioxide test the is direct conductivity method, pass the test after the total carbon content in samples of oxidation reaction and not after oxidation of the sample total inorganic carbon content difference to determine the total content of organic carbon, namely: total organic carbon (TOC) = total carbon (TC) - Total inorganic carbon (TIC).
Main features:
Very high precision, high sensitivity, simple operation.
This user-friendly interface, a key operation function, automatic tube cleaning function.
This high performance CPU, touch screen design, large color 640*480 dot matrix display.
I don't need to open the chassis to replace the UV lamp and tubing.
This detection limit can be set, automatic limit alarm function.
This is a RS232 data interface, the historical data can be stored for 6 months.
By off-line detection and on-line detection can be optional.
It has a micro printer interface (external printer).
Main features
1 strict accordance with the United States Pharmacopoeia and European Pharmacopoeia and other international standards, in line with Chinese Pharmacopoeia standards
2 fast, efficient and reproducible
3 patented VITA Technology
4 automation and inligent
5 configurable total nitrogen determination module
6 can configure Swab-test clean experiment module
7 good compatibility of particulate matter
8 provide OQ, PQ, IQ