韩国KODO NXG超声波发生器
韩国KODO NXG超声波发生器
韩国KODO NXG超声波发生器
韩国KODO NXG超声波发生器
韩国KODO NXG超声波发生器

NXG韩国KODO NXG超声波发生器

参考价: 面议

具体成交价以合同协议为准
2022-04-26 20:10:01
10
产品属性
关闭
上海君翼仪器设备有限公司

上海君翼仪器设备有限公司

初级会员1
收藏

组合推荐相似产品

产品简介

韩国KODO NXG-SA超声波发生器特点和参数:*主电源s/w-打开电源按钮,使所有功能就绪。
*SWEEP功能-对除气和减少污点(死区)有良好的效果。
*运行功能:有功率设定、程序操作、定时器、风机运行温度设定功能。
*远程控制功能-远程控制超声波输出。
*rs-485通信-通过rs-485通信,用户可以监视和控制plc上的操作。

详细介绍

韩国KODO NXG-SA超声波发生器特点和参数:

Output Control - Output level can be controlled from 10 to 99%.

SWEEP Function - Built in Sweep function has a great affect in deaeration and decreasing stain spots (Dead Zone).

Remote Function - Remote control function using exterior point of contract.

FND Function - One can easily identify frequency, power, time, and temperature through FND.

Other Functions - Alarm Function, 4~20mA communication function.

*输出控制-输出电平可控制在10%~99%之间。

·*SWEEP功能-对除气和减少污点(死区)有良好的效果。

·远程功能-使用外部契约点的遥控功能。

·fnd功能-通过fnd可以方便地识别频率、功率、时间和温度。

·其他功能-报警功能、4~20 ma通信功能。

 

超声波发生器型号

NXG-SA600 / SA900 / SA1200 / SA1500 / SA1800

超声波频率

28Khz / 40Khz

超声波输出功率

600W / 900W / 1200W / 1500W / 1800W

超声波换能器

B.L.T Transducer

SWEEP 功能

O

控制方法

Analog Type模拟量

尺寸(mm)

300x400x120

电源

AC220V/60Hz

重量

12Kg

 

韩国KODO NXG-HD高频超声波发生器特点和参数:

Generator for High-frequency - NXG-HD series is designed for high-frequency from 68Khz to

168Khz.

Easy of Use - Users can easily control the operation using control panel.

Self Diagnosis Function - Users can easily figure out the cause of malfunction due to self

diagnosis function.

DATA Check - One can easily check operation frequency, power, and internal

temperature level without separate measuring instrument.

RS-485 Communication - Though the RS-485 communication, users can monitor and control

operation on PLC.

Alarm Function - It alerts the users if there is any problem.

高频超声波发生器型号

NXG-HD-68K/75K/100K/132K/168K

超声波频率

68Khz/75Khz/100Khz/132Khz/168Khz

超声波输出功率

600W / 900W / 1200W

超声波换能器

B.L.T Transducer

振动方法

PLL

尺寸(mm)

310x440x130

输入电压

AC220V/60Hz

输入电流

6A(at 1200W of output)

重量

12Kg

 

韩国KODO NXG-HSS高速切换三频率发生器特点和参数:

High-speed switching 3-Frequency Generator NXG-HSS

1) By switching the position of the standing wave for three different frequencies at a high speed, it

provides a cleaning power of each frequency at the same time.

2) Because the positions of the standing wave of each frequeny is different.

A.To prevent stains caused by standing waves.

B.It provides precise cleaning, and can also reduce damage to the cleaning tank.

3) The burst wave generated by high-speed switching method creates a number of high-order vibration

to the cleaning of the glass capillary tube and precision parts.

4) Ultrasound of 100Khz is a degassing effect, it is possible to prevent the attenuation of ultrasonic

cleaning power to keep up to near the top of the wash tank.

5) The pumping effect caused by high speed switching(mSec) is effecting washed complex fine holes.

6) The life time of Tank and Transducers increases.

超声波发生器型号

NXG-HSS

超声波发生器方法

Oscillation Mode Choice

F1-F2, F1-F3, F2-F3 2 frequency Switching / F1-F2-F3 3 frequency Switching

切换周期

1~10ms Selectable

超声波频率

28K/45K/100Khz

超声波输出功率

600W / 600W / 300W

超声波换能器

B.L.T Transducer for Multi Transducer

输入功率

Single AC200V ~ AC220V / 60Hz, 4A Max

显示

Character LCD(2 * 20) & LED

输出功率

50% ~ 100%

计时器

1sec ~ 99min 59sec

环境

Temperature:0~40, Humidity 0~80%

尺寸(mm)

310x440x130

重量

12Kg

 

韩国KODO NXG-MD低输出超声波发生器特点和参数:

High-speed switching 3-Frequency Generator NXG-HSS

1) By switching the position of the standing wave for three different frequencies at a high speed, it

provides a cleaning power of each frequency at the same time.

2) Because the positions of the standing wave of each frequeny is different.

A.To prevent stains caused by standing waves.

B.It provides precise cleaning, and can also reduce damage to the cleaning tank.

3) The burst wave generated by high-speed switching method creates a number of high-order vibration

to the cleaning of the glass capillary tube and precision parts.

4) Ultrasound of 100Khz is a degassing effect, it is possible to prevent the attenuation of ultrasonic

cleaning power to keep up to near the top of the wash tank.

5) The pumping effect caused by high speed switching(mSec) is effecting washed complex fine holes.

6) The life time of Tank and Transducers increases.

超声波发生器型号

NXG-HSS

超声波发生器方法

Oscillation Mode Choice

F1-F2, F1-F3, F2-F3 2 frequency Switching / F1-F2-F3 3 frequency Switching

切换周期

1~10ms Selectable

超声波频率

28K/45K/100Khz

超声波输出功率

600W / 600W / 300W

超声波换能器

B.L.T Transducer for Multi Transducer

输入功率

Single AC200V ~ AC220V / 60Hz, 4A Max

显示

Character LCD(2 * 20) & LED

输出功率

50% ~ 100%

计时器

1sec ~ 99min 59sec

环境

Temperature:0~40, Humidity 0~80%

尺寸(mm)

310x440x130

重量

12Kg

 

上一篇:电压表和电流表都是根据一个原理进行作业的 下一篇:现代仪器仪表技术发展战略详细分析
提示

请选择您要拨打的电话:

21407 [{"ID":"725250","CompanyID":"63365","Title":"电压表和电流表都是根据一个原理进行作业的","Picture":"","PictureDomain":"","UpdateTime":"2024/5/6 7:12:35","CreateTime":"2024/5/6 7:12:35","ClassName":"技术交流","rn":"3"},{"ID":"670719","CompanyID":"53679","Title":"现代仪器仪表技术发展战略详细分析","Picture":"mt0016/3/20100926/634211198793593750.jpg","PictureDomain":"img43","UpdateTime":"2023/10/9 14:29:46","CreateTime":"2023/9/14 7:35:27","ClassName":"技术交流","rn":"4"}]