卫生级隔膜阀 Diaphragm Valves

应用  隔膜阀手动或气动操作，专门应用于制药工业中的卫生和无菌过程。

该阀门非常适用于流体控制和开/关的任务。

工作原理  膜片提供阀体密封和阀座密封。里面没有路径通到外部环境，所以该阀门适用于无菌过程。

当阀门关闭时，支撑膜片的压力垫朝阀体上的密封面移动。当压力板移动时,膜片弯曲，被迫推向阀体中心的阀座区域，因此关闭了通向阀体的流体路径。

阀体和压力板的相互关系，防止了膜片的挤压。

该阀门可以手动也可以气动操作，也可以通过控制器和电磁阀控制。

技术规格    压力10bar( 145 PSI )

工作温度-10℃+120℃(EPDM)-14°F +248°F( +140℃ (SIP,30)284°F)

认证:PED 97/23 EC

设计和特点  该隔膜阀同其他阀门设计相比，该阀门有着*的流量特点。更容易清洁，很好的处理带颗粒的物料，在流量控制的应用上.气穴现象也更少些。

迷你型隔膜阀规格: 1/4" 3/8"  1/2"3/4"             隔膜闽规格:1" 1 14" 1.5" 2"2.5"3" 4"

适用于CIP/SIP

和物料接触部分AISI 316L                                  其他不锈钢部分AISI 304

内表面处理 亮光Ra ≤ 0.5μm                            外表面处理亚光/亮光

选项

连接(标准)。卡箍、焊接、螺纹、DIN SMS IDF ISO 3A BPE

阀体结构: 直通、三通、U型

膜片材料：EPDM，SILICON（硅胶）VITON(氟胶) EPDM +PTFE(双层膜片)符合FDA

177.2600

Diaphragm Valves                                                          

Applications

Diaphragmvalves，manually or pneumatic ally operated，are specifically designed for use on hygienic and aseptic processesin the pharmaceutical industries. The valve is excellent for flow control aswell as for open/close duties.

Operating PrinciplesThe diaphragm provides the body seal as well as the seat seal. There are nopaths to the outside environment and as such the valve is suitable for aseptic processes.

Asthe valve is closed a pressure pad which supports the diaphragm moves towardsthe sealing face on the body. As the pressure plate moves the diaphragm flexes andis forced down onto the seat area in the centre of the body thus closing offthe flow path through the body. The inter-relationship of body to the pressureplate prevents over compression of the diaphragm. The valve can be actuatedeither manually or pneumatically and controlled by control tops and solenoidvalves.

Technical specifications           Max.pressure: 10 BAR(145PSl)

Workingtemperature:-10℃ to +120℃(EPDM)- 14°F to 248°F(+ 140℃(SIP,max.30 min) 284°F)

Approvedaccording to Directive PED 97/2 3 EC

Design and features Thediaphragm valves are better in feature of flow incomparison with other valves. lt is easier to clean up and betterto process the substance with particles. The phenomenon of air pocket is rareduring application of flow control.

Minidiaphragm valve available size: 1/4"，3/8"，1/2"，3/4”，

Diaphragmvalve available size: 1"，11/4".11/2"，2"，2.5"，3",4"

Suitablefor ClP/SlP.   Parts in contact with theproduct: AlSl 3 16L,

Otherstainless steel parts: AlSl 304,   lnternalsurface finish bright,Ra ≤0.5 μm

Externalsurface finish satin/bright

Options

Connections(standard):clamp, weld, thread, DlN SMS lDF lSO 3A BPE

Bodyconstruction: Straight, Three ways, U type Diaphragms in EPDM,

SlLlCON,VlTlON, EPDM+PTFE, all of them according to FDA 177.2600