IGT-1205AT

IGT-1205AT

参考价: 面议

具体成交价以合同协议为准
2023-11-04 10:25:30
11
产品属性
关闭
深圳市锦辰科技有限公司

深圳市锦辰科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

Flexible

详细介绍

Flexible, Reliable and Industrial-grade Network Distance Extension Solution
PLANET IGT-1205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with one 10/100/1000Base-T RJ-45 copper and two 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-1205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from �40 to 75 degrees C.

Fiber-Optic Link Capability Enables Extension of Network Deployment
The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optic uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (Multi-mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-mode fiber cable), and also the Fast Ethernet distance can be extended from 2km (Multi-mode fiber cable) up to 20/40/60 kilometers (Single-mode fiber cable). They are well suited for applications within the factory data centers and distributions.
Adjustable 3-Port Switch Mode or 2 Fiber Redundant Mode
Via the built-in DIP switch, the two SFP fiber interfaces of the IGT-1205AT can be configured as Ethernet switch mode or Fiber Redundant mode. With the Ethernet switch mode, it can operate in Store-and-Forward mechanism with high performance; with the 2-port Fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.
Environmentally Hardened Design
The IGT-1205AT is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGT-1205AT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGT-1205AT can be placed in almost any difficult environment. The IGT-1205AT also allows either DIN rail or wall mounting for efficient use of cabinet space.

Convenient and Reliable Power System
To enhance the operation reliability and flexibility, the IGT-1205AT is equipped with two DC power input connectors for redundant power supply installation. It also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs.
Hardened Environment Application
PLANET IGT-1205AT Industrial Gigabit Media Converter offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced. Moreover, the IGT-1205AT is also compatible with 100Mbps and 1000Mbps SFP transceivers to provide a strong, stable and long-distance connection and flexible industrial networking deployment.
Redundancy Application
The IGT-1205AT industrial Gigabit Media Converter provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.
Physical Port
    1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Fiber Port Redundancy
    Link status auto-detect and redundant on dual ports with the same connector typeOnly Primary-Port is active at a time, the Backup-Port is blockedWhen Primary-Port link failure occurs, the traffic will swap to Backup-Port automaticallyOnce the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port
Layer 2 Features
    Supports auto negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex modeHigh performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidthPrevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)9K Jumbo Frame Size supportIntegrated address look-up engine, support 1K absolute MAC addressesAutomatic address learning and address aging
Industrial Case / Installation
    Slim IP30 metal case protectionDIN rail and wall mount designRedundant Power Design
    - 12 to 48V DC, redundant power with polarity reverse protect function
    - AC 24V power adapter acceptable
    Supports EFT protection 6000 VDC for power lineSupports 6000 VDC Ethernet ESD protection-40 to 75 degrees C operating temperature
硬件特性
电口1 x 10/100/1000Base-T RJ-45 TP
Auto-MDI/MDI-X, Auto-Negotiation
光口2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2)
Compatible with 100Base-FX SFP
DIP开关DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX
DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX
DIP-3: Switch mode / Fiber Redundant mode
连接器Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
报警功能Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
LED指示灯3 x LED for System and Power:
?? Green: DC Power 1
?? Green: DC Power 2
?? Green: Power Fault
2 x LED for Per Copper Port:
?? Green: 1000 LNK/ACT
?? Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-1 and Port-2):
?? Green: LNK/ACT
ESD 保护6KV DC
EFT 保护6KV DC
材质IP30 type metal case
安装方式DIN rail kit and wall mount ear
尺寸135 x 87 x 32mm
重量505g
电源要求DC 12~48V or AC 24V
Redundant power with polarity reverses protection function
功率/损耗4.8 watts/16BTU
线缆类型Twisted-Pair
?10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters
?100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
?1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
Fiber-Optic Cable
?1000Base-SX:
??50/125?m or 62.5/125?m multi-mode fiber optic cable, up to 550m
?1000Base-LX:
??9/125?m single-mode fiber optic cable, up to 10/20/30/40/50/70/120
??kilometers (vary on SFP module)
?100Base-FX:
??? 50/125?m or 62.5/125?m multi-mode fiber optic cable, up to 2
???kilometers
??? 9/125?m single-mode fiber optic cable, up to 20/40/60 kilometers
???(vary on SFP module)
2层特性
处理方式Store-and-Forward
MAC地址表1K entries
流量控制Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
背板带宽6Gbps
吞吐量4.46Mpps@64bytes
传输单元9216 bytes
传输速率SX/LX: 2000Mbps (full-duplex)
FX: 200Mbps (full-duplex)
TP: 10/20Mbps, 100/200Mbps, 2000Mbps
标准一致性
标准一致性IEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX
IEEE 802.3x Full-Duplex Flow Control
遵从法规FCC Part 15 Class A, CE
稳定性测试IEC60068-2-32(Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)
环境
温度
Operating:-40~75 degrees C
Storage:-40~75 degrees C
湿度
Operating:5~95% (non-condensing)
Storage:5~95% (non-condensing)
上一篇：FC311A-3普联千兆单模单纤光纤收发器 下一篇：普联TL-SM310U 千兆SFP电口光模块
提示

请选择您要拨打的电话：

132775 [{"ID":"751332","CompanyID":"129825","Title":"FC311A-3普联千兆单模单纤光纤收发器","Picture":"","PictureDomain":"","UpdateTime":"2024/10/21 7:33:24","CreateTime":"2024/10/21 7:33:24","ClassName":"技术交流","rn":"3"},{"ID":"751089","CompanyID":"129825","Title":"普联TL-SM310U 千兆SFP电口光模块","Picture":"","PictureDomain":"","UpdateTime":"2024/10/19 7:19:12","CreateTime":"2024/10/19 7:19:12","ClassName":"技术交流","rn":"4"}]