品牌
其他厂商性质
苏州市所在地
ETO-1200L油式模温机主要部品配置及特点:
型号Model | ETO-75L | ETO-200L | ETO-600L | ETO-1200L | ETO-1800L | ETW-2400L | ETW-3600L | |
使用媒体 Medium applied | 导? 热?? 油 | |||||||
冷却水量 Cooling water quantity | 约0.05Mpa(0.5kgf/C㎡)~0.39Mpa(3.0kgf/C㎡),10L/min以上 | |||||||
温度控制范围℃ Teperature control scope | L型ModelL:60-80、M型ModelM:60℃~200 | |||||||
油 泵 | 电机功率kw Power of motor | 0.37 | 0.75 | 0.75 | 1.5 | 1.5 | 2.2 | 2.2 |
zui大压力mpa Max.pressure | 0.2 | 0.3 | 0.3 | 0.38 | 0.38 | 0.35 | 0.35 | |
zui大流量L/min Max.flow | 70 | 100 | 100 | 280 | 280 | 350 | 350 | |
加热功率kw Heating power | 3 | 6 | 9 | 12 | 18 | 24 | 36 | |
温度调解Temperature adjustmen | 加热.冷却PID/Heating&cooling PID | |||||||
报警功能? Alarm functiont | 电源逆相、水泵过负荷、传感器异常、媒体不足、过温报警、加热不良等/ Counter phase of ,over-load of water pump,abnormal sensor,insufficient medium,ouer temperature alarm,bad heating,etc. | |||||||
液体检知器? Liquid tester | 浮子开关或:(压力开关)Float switch or pressure switch | |||||||
配 管 | 冷却水入口Entrance of cooling water | 1/2B﹡1软管接头+过滤器Soff pipe joint+Filter | ||||||
冷却水出口Exit of cooling | 1/2B×1 | |||||||
媒体送出口Exit of medium | 3/8B×2球阀 | 3/8B×2球阀 | 3/8B×4球阀 | 1/2B×4球阀 | 1/2B×4球阀 | 1/2B×6球阀 | 1/2B×6球阀 | |
媒体返回口Rutum entrance of medium | 3/8B×2球阀 | 3/8B×2球阀 | 3/8B×4球阀 | 1/2B×4球阀 | 1/2B×4球阀 | 1/2B×6球阀 | 1/2B×6球阀 | |
外形尺寸 mm? Dimension | 550×273×480 | 550×273×600 | 550×273×720 | 700×300×725 | 800×400×900 | 800×400×1000 | 800×400×1000 | |
机器重量 kg? Weight of machine | 30 | 50 | 80 | 120 | 130 | 140 | 140 |