The 90i-610s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope ,Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter a BNC to banana plug adapter PM9081/001 (included) lets you use this probe with your DMM.
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
PV350 Pressure Vacuum Module
Compatible with all Fluke and most popular DMMs
Digital pressure and vacuum measurements in a single module
Transducer sealed in 316 stainless steel compatible with variety of liquids and gases
Measures vacuum to 76 cm Hg
Displays results in English (psig of Hg) or metric (kPa or cm Hg) units
Measures pressure to 3447 kPa (500 psig)
One year warranty
RPM80 感应式采集/外部触发器
Provides RPM readings.
TL28A63in. 鳄鱼夹测试线组
Large jaws, long leads and a piercing probe. Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth. Large piercing needle for penetrating larger gauge wires. 1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F). Rated for 30 V, 10 A. One red, one black.
Flexible silicone insulated leads are heat and cold resistant
