SINEAX A230s

Multifunctional power monitor with system analysis.
Panel mounting, 96 x 96 mm.

The A230s is designed for application in high, medium and low voltage systems. Any current and voltage transformers are taken into account in the calculation of the measured values.

F         Accurate measured values:
U, I: 0.2% P, Q, S, PF, meter: 0.5% F: 0,02 Hz

F         4-quadrant measurement of all values in AC systems

F         Safe 3-way galvanic isolation between all circuits

F         2 outputs for pulse or limit values

F         4 meters for active power: Incoming/outgoing with high/low tariff＊

F         4 meters for reactive power:
Inductive/capacitive or incoming/outgoing with high/low tariff＊

F         All counter values, recorded values, and settings are kept on a power supply failure

F         System/application: Single-phase 3L balanced/unbalanced (Aron, Full), 4L balanced/unbalanced (Open-Y, Full)

F         Dimensions 144 x 144 x 46 mm

F         4-digit, 14 mm high LED display

The modules EMMOD20x extend the functionality of the power monitoring devices of the A series. Depending on the module different bus interfaces are supported, partly with additional data logger and digital inputs as well as pure analog output extensions.

The following modules are available:

EMMOD201
Switchable RS232/RS485 (Modbus) interface, data logger, digital input

EMMOD202
2 analog outputs

EMMOD203
Ethernet interface (Modbus/TCP, HTTP), data logger with timestamp, 2 digital inputs

EMMOD204
Profibus DP interface