ND 280

Axes

1

Encoder inputs

1 VPP,   11 µAPP or EnDat1): D-sub female 15-pin (automatic interface recognition)

Input frequency

1 VPP: ≤ 500 kHz; 11 µAPP: ≤ 100 kHz

Subdivision factor

4096-fold

Display step2)

Adjustable, max. 9 digits

Linear axis: 0.5 to 0.002 µm

Angular axis: 0.5° to 0.000 01° or 00°00’00.1

Display

Monochrome TFT screen

Position values, dialogs and input, graphic functions and soft keys

Status display

Operating mode, REF, datum, scaling factor, compensation, stopwatch, unit of measure, soft-key level

Functions

• REF reference-mark evaluation for distance-coded or single reference marks
• 2 reference points
• Distance-to-go mode
• Integrated help and diagnostics
• Remote operation via serial interface

Axis-error compensation

Linear axis: Linear and multipoint over up to 200 points

Angle axis: Multipoint linear with 180 compensation points (every 2°)

Data interface

• RS-232-C/V.24
• USB (UART) port type B

Power connection

100 V to 240 V AC (-10 % to +15 %), 48 Hz to 62 Hz; 30 W

Operating temperature

0 °C to 45 °C (storage temperature –20 °C to 70 °C)

Protection EN 60 529

IP 40, front panel IP 54

Weight

Approx. 2.5 kg

ND 522

ND 523

Axes

2 axes from A to Z

3 axes from A to Z and ZS

Encoder inputs

2 x TTL; D-sub female 9-pin

3 x TTL; D-sub female 9-pin

Input frequency

† 100 kHz

Signal period

2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm

Line count

Any

Evaluation

1/2/4-fold

Display step 1)

Linear axis: 1 mm to 0.000 1 mm; 0.005 with LS 328/LS 628

Angular axis: 1° to 0.000 1° (00° 00‘ 01'')

Display

Monochrome flat screen for position values, dialog and input displays, graphic functions and graphic positioning support

Status display

Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch

For milling/drilling/boring

Tool compensation R+, R–

For turning

Radius/diameter display

Separate or sum display for Z and ZO

Functions

• 10 datums
• 16 tools
• REF reference mark evaluation for distance-coded and single reference marks
• Distance-to-go display with nominal position input in absolute or incremental values
• Contour monitoring
• Scaling factor
• mm/inch switching
• HELP: On-screen operating instructions
• INFO: Stopwatch, pocket calculator, cutting data calculator (for milling), taper calculator (for turning)

For milling/drilling/boring

• Calculation of positions for hole patterns (circular patterns as well as linear patterns)
• Tool radius compensation

For turning

• Freezing the tool position for back-off

Error compensation

Axis error: Linear and multipoint over up to 200 points

Backlash compensation: For length measurement via ball screw and rotary encoder

Data interface

USB type B connector; 115 200 baud

• For output of measured values and parameters
• For input of parameters, remote control of keys and commands

Accessories

Base, mounting arm

Power connection

100 V to 240 V AC (–15 % to +10 %), 48 Hz to 62 Hz; 54 W

Operating temperature

0 °C to 45 °C (storage temperature –20 °C to 70 °C)

Protection EN 60 529

IP 40, front panel IP 54

Weight

Approx. 2.6 kg

1) Depends on the signal period or line count of the connected encoder

ND 780

Axes

Up to 3 axes from A to Z and ZO, ZS

Encoder inputs

3 x 1 VPP or 11 µAPP; D-sub female 15-pin (automatic interface recognition)

Input frequency

†≤ 100 kHz

Signal period

2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm

Line count

Any

Subdivision factor

Max. 1024-fold

Display step 1)

Linear axis: 1 mm to 0.000 1 mm

Angular axis: 1° to 0.000 1° (00° 00‘ 01'')

Display

Monochrome flat screen for position values, dialog and input displays, graphic functions and graphic positioning support

Status display

Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch

For milling/drilling/boring

Tool compensation R+, R–

For turning

Radius/diameter display

Separate or sum display for Z and ZO

Functions

• 10 datums
• 16 tools
• REF reference mark evaluation for distance-coded and single reference marks
• Distance-to-go display with nominal position input in absolute or incremental values
• Scaling factor
• mm/inch switching
• HELP: On-screen operating instructions
• INFO: Stopwatch, pocket calculator, cutting data calculator (for milling), taper calculator (for turning)

For milling/drilling/boring

• Calculation of positions for hole patterns (circular patterns as well as linear patterns)
• Tool radius compensation
• Probing function for datum acquisition with the KT edge finder: "Edge," "Centerline" and "Circle center"

For turning

• Freezing the tool position for back-off
• Setup functions for datum setting with the tool

Error compensation

Axis error: Linear and multipoint over up to 200 points

Backlash compensation: For length measurement via ball screw and rotary encoder

Data interface

RS-232-C/V.24 300 to 115 200 baud

• For output of measured values and parameters
• For input of parameters, remote control of keys and commands

Switching I/O

• Two inputs (pulse or contact) for measured value output
• 1 input for KT edge finder
• 1 input for edge finder with contact triggering
• Further input/outputs over the IOB 49 input/output unit

Accessories

KT edge finder (for milling) tilting base, handle, tilt/swivel mount, pivot arm

Power connection

100 V to 240 V AC (–15 % to +10 %), 48 Hz to 62 Hz; 30 W

Operating temperature

0 °C to 45 °C (storage temperature –20 °C to 70 °C)

Protection EN 60 529

IP 40, front panel IP 54

Weight

Approx. 2.6 kg

1) Depends on the signal period or line count of the connected encoder

POSITIP 880

Axes

Up to 6 axes from A to Z and ZO, ZS

Encoder inputs

6 x 1 VPP, 11 µAPP or EnDat 2.1; D-sub female 15-pin (automatic interface recognition)

Input frequency

≤ 100 kHz

Signal period

0.128 µm, 2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm

Line count

Any

Subdivision factor

Max. 1024-fold

Display step 1)

Linear axis: 1 mm to 0.005 µm

Angular axis: 0.01° to 0.000 1° (00° 00‘ 01‘‘)

Display

Color flat screen for position values, dialog and input displays, graphic functions, graphic positioning support and contour monitoring

Status display

Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch

For milling/drilling/boring

Tool compensation R+, R–

For turning

Radius/diameter display; separate or sum display for Z and ZO

Functions

• REF reference-mark evaluation for distance-coded or single reference marks
• Distance-to-go mode, nominal position input (absolute or incremental)
• Scaling factor
• Contour monitoring with magnify function
• Any axis combinations
• HELP: On-screen operating instructions
• INFO: Stopwatch, pocket calculator, cutting data calculator (for milling), taper calculator (for turning)

For milling/drilling/boring

• 99 datums and 99 tools
• Calculation of positions for hole patterns (circular patterns as well as linear patterns)
• Tool radius compensation
• Probing function for datum acquisition with the KT edge finder: "Edge," "Centerline" and "Circle center"
• Positioning aids for milling and the roughing out of a rectangle pocket

For turning

• 1 datum, 99 tools
• Freezing tool position for back-off
• Oversize allowances

Programming

Up to 999 program blocks per program; sub programming capability with turning and mirroring; teach-in programming

Cycles For milling/drilling

For turning

Line segments, circular arcs, chamfers, circular and linear hole patterns, rectangular pockets

Line segments, circular arcs, chamfers, multipass

Error compensation

Linear and multipoint, up to 128 measuring points

Interfaces Serial

Parallel

RS-232-C/V.24 300 to 115 200 baud

• For output of programs, measured values and parameters
• For loading of programs and parameters

Centronics for output of measured values

Switching I/O

• Via IOB 89 external input/output unit
• 1 input for KT edge finder

Accessories

KT edge finder (milling) tilting base, tilt/swivel mount, pivot arm

Power connection

100 V to 240 V AC (–5 % to +10 %), 48 Hz to 62 Hz; 35 W

Operating temperature

0 °C to 45 °C (storage temperature –20 °C to 70 °C)

Protection EN 60 529

IP 40, front panel IP 54

Weight

Approx. 3.2 kg

1) Depends on the signal period or line count of the connected encoder

ND 1202 R

ND 1203 R

Axes

2 from A to Z

3 from A to Z

Encoder inputs*

TTL (D-sub female 9-pin) or 1 VPP (D-sub female 15 pin)

Input frequency

≤ 200 kHz

Signal period

Any

Line count

Any

Subdivision factor

TTL: Max. 4-fold

1 VPP: Max. 40-fold

Display step 1)

Adjustable, max. 7 digits

Display

5.7” monochrome flat-panel display for position values, dialogs and inputs, and soft keys

Functions

• Conversion of Cartesian coordinates (X,Y) to polar coordinates (R,A)
• XY/RA switch-over
• Alignment function
• REF reference-mark evaluation for distance-coded or single reference marks
• Distance-to-go display in machine coordinates R and A
• mm/inch switching
• Absolute-incremental display
• Calculation of positions for hole patterns (circular patterns as well as linear patterns)
• Probing functions for workpiece orientation and reference-point acquisition with KT edge finder: "Edge," "Centerline" and "Circle center"

Programming

Hole patterns with a total of 999 hole positions

Cycles

Hole patterns (circular and linear patterns) with max. 100 positions

Error compensation

Linear axis-error compensation as part of calibration

Data interface

• RS-232-C/V.24; 300 to 115 200 baud
• USB type A

Switching inputs

• Zero reset, measured value output (e.g. by foot switch)
• Edge finder (through universal touch probe interface)

Accessories

Mounting arms, KT-130 edge finder, foot switch

Power connection

100 V to 240 V AC (–15 % to +10 %), 47 Hz to 63 Hz; 30 W

Operating temperature

0 °C to 45 °C (storage temperature –20 °C to 70 °C)

Protection EN 60 529

IP 40

Mounting*

Tilting base or mounting base

Weight

Approx. 1.6 kg

* Please select when ordering

1) Depends on the signal period of the connected encoder as well as the subdivision factor

ND 5023

Axes

Up to 3 axes

Encoder inputs

3 x TTL D-sub, female, 9-pin

Input frequency

≤ 500 kHz

Signal period

2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm

Line count

Any

Display step1)

Linear axis: 1 mm to 0.000 1 mm; 0.005 mm with LS 328 C/LS 628 C

Angular axis: 1° to 0.000 1° (00° 00‘ 01'')

Display

7-inch color wide screen (15:9), resolution 800 x 480 pixels for position values, dialog messages, 
input and graphic functions

Functions

• Dialog-guided installation
• User and data management
• Moving axis highlighted
• 10 presets, 16 tools
• Reference mark evaluation for distance-coded and single reference marks
• Distance-to-go display with nominal position input in absolute or incremental values
• Graphic positioning aid
• Scaling factor
• mm/inch switchover
• Integrated help system
• Stopwatch, calculator

For milling/drilling/boring

• Calculation of positions for hole patterns (bolt circles, linear hole patterns)
• Tool radius compensation
• Cutting data calculator

For turning

• Freeze tool position during retraction
• Sum display of axes in the top slide
• Inclined top slide
• Taper calculator

Error compensation

Linear (LEC) and segmented linear (SLEC) over up to 200 points

Data interface

USB 2.0 type C

• For output of measured values and parameters to a USB stick or PC
• For input of parameters, remote control of keys and commands

Accessories

Single-position tilting base, multi position holder, mounting frame, protective cover, power cable

Power connection

AC 100 V (–10 %) to 240 V (+5 %), 50 Hz to 60 Hz (±5 %), ≤ 33 W

Operating temperature

0 °C to +45 °C (storage temperature –20 °C to +70 °C)

Protection EN 60 529

IP54, back panel IP 40

Mounting

Single position tilting base, multiposition holder; compatible fastening systems to VESA MIS-D 100

Mass

≈ 1.7 kg

1) Depends on the signal period or line count of the connected encoder