详情

HYDAC贺德克温度传感器ETS 4000  英文描述

Available versions:
Standard;
with HSI sensor detection,
with ATEX / CSA / IECEx - approval

The ETS 4000 is an electronic temperature transmitter which, because of its robust design, is used in particular for temperature measurement in hydraulic applications in industry. With the temperature sensor, based on a PT 100 and corresponding evaluation electronics, temperatures ranging from -25°C to +100°C can be measured. As a standard, the analogue output signals from 4 ... 20 mA and 0 ... 10V are available for integration in modern control systems. With a pressure resistance of up to 600 bar and excellent EMC properties, the ETS 4000 is ideally suited for utilisation, even in rough environments. The electronic temperature transmitter ETS 4548-H with HSI sensor detection was specially developed for use in conjunction with the HYDAC measurement devices HMG 500, HMG 510, HMG 3000 and CMU 1000. For data transmission purposes, the ETS 4548-H is equipped with an HSI interface (HYDAC Sensor Interface). Thanks to this, the HSI sensor is recognised compley automatically by the HYDAC measurement devices listed above and all necessary basic device settings are then immediay undertaken automatically. The variant with pressure-proof capsulation and 3-way approval in accordance with ATEX, CSA and IECEx enables universal, world-wide utilisation of the devices in explosion-hazard surroundings.
Ideal for industrial applications
Robust design
Excellent EMC characteristics
Good long-term stability
Standard Degree of protection IP 65
Optionally available with ATEX / CSA / IECEx approval

HYDAC贺德克温度传感器ETS 4000 中文描述

HYDAC贺德克温度传感器-正确的产品适用于各种应用。

型号系列
ETS 4000：
稳健的温度变送器
温度范围： -25 °C? 100℃
信号输出4 ... 20 mA或0 ... 10 V
用于工业应用的
防护等级为IP 65等级标准

ETS 7000
极其紧凑的设计
温度范围： -25 °C? 100℃
信号输出4 ... 20 mA的
对于系列，如在移动领域
防护等级为IP 67等级标准

HTT 8000
非常紧凑的设计
温度范围： -25 °C? 125°C
各种信号输出，如4 ... 20毫安， 0 ... 5 V和比例
OEM应用，例如，在移动领域
防护等级为IP 67等级标准